2701505 Phoenix Contact Programmable Logic Controllers

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Depth
  38 mm
• Height
  185 mm
• Permissible humidity (operation)
  5 % ... 95 %
• Permissible humidity (storage/transport)
  5 % ... 95 %
• Degree of protection
  IP65/IP67
• Note on the connection method
  B-coded
• Equipment type
  PROFIBUS slave
• Description of the input
  EN 61131-2 types 1 and 3
• Drill hole spacing
  198.5 mm
• Ambient temperature (storage/transport)
  -25 °C ... 85 °C
• Transmission speed
  9.6 kbps ... 12 Mbps (Automatic baud rate detection)
• Number of positions
  4
• Current consumption
  typ. 3 mA ±15 % (at 24 V DC)
• UNSPSC 21.0
  32151602
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Number
  2
• Address area assignment
  1 ... 126, adjustable
• Supply voltage range
  18 V DC ... 31.2 V DC (including all tolerances, including ripple)
• Connection technology
  4-conductor
ECLASS 7.0
27242604
Width
60 mm
Note on dimensions
The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
ETIM 7.0
EC001599
UNSPSC 20.0
32151602
UNSPSC 18.0
32151602
Housing material
Zinc die-cast
Transmission physics
PROFIBUS-DP-compliant copper cable
Input name
Digital inputs
System-specific protocols
PROFIBUS protocols DP V1
Supply voltage
24 V DC
UNSPSC 19.0
32151602
Interference emission
Noise emission test as per EN 61000-6-4 Class A
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 6.0
27242600
Protective circuit
Overload protection, short-circuit protection of sensor supply
Input filter time
< 1000 µs
Connection method
M12 connector, double occupancy
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 5.1
27242600
ETIM 4.0
EC001599
ETIM 2.0
EC001433
UNSPSC 7.0901
43201404
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Input voltage range "0" signal
0 V ... 5 V DC
Test section
24 V supply (communications power and sensor supply, digital inputs)/bus connection 500 V AC 50 Hz 1 min.
Designation
Actuators (UA) for additional devices
Designation connection point
Copper cable
Number of inputs
16
Input voltage range "1" signal
11 V DC ... 30 V DC
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27242604
Net weight
707.8 g
Nominal input current at UIN
typ. 3 mA
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
ECLASS 9.0
27242604
Ambient temperature (operation)
-25 °C ... 60 °C
Mounting type
Wall mounting or DIN rail mounting; both with mounting plate.
Nominal input voltage UIN
24 V DC
ECLASS 4.1
27240400
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
UNSPSC 11
39121311
UNSPSC 13.2
32151602
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
ECLASS 4.0
27240400
ETIM 6.0
EC001599
ECLASS 5.0
27242200
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
ETIM 3.0
EC001599
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
ECLASS 10.0.1
27242604
UNSPSC 6.01
43172015
UNSPSC 12.01
39121311