2701488 Phoenix Contact Programmable Logic Controllers

Product Details

• Height
  185 mm
• Ambient temperature (operation)
  -25 °C ... 60 °C
• Permissible humidity (storage/transport)
  5 % ... 95 %
• Designation
  Actuators (UA) for additional devices
• Specification
  CIP Edition 3.11EIP adaptation of CIP 1.12
• Current consumption
  typ. 3 mA ±15 % (at 24 V DC)
• Nominal input current at UIN
  typ. 3 mA
• Input voltage range "1" signal
  11 V DC ... 30 V DC
• Interference emission
  Noise emission test as per EN 61000-6-4 Class A
• REACh SVHC
  Lead 7439-92-1
• Width
  60 mm
• Permissible humidity (operation)
  5 % ... 95 %
• Number
  2
• Housing material
  Zinc die-cast
• Number of positions
  4
• Supply voltage
  24 V DC
• Cable length
  max. 30 m (To the sensor)
• Immunity to EF
  Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
• Description of the input
  EN 61131-2 types 1 and 3
• ECLASS 4.0
  27240400
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Note on dimensions
The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
Mounting type
Wall mounting or DIN rail mounting; both with mounting plate.
Note on the connection method
D-coded
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Net weight
714.4 g
Transmission speed
10/100 Mbps (with auto negotiation)
System-specific protocols
EtherNet/IP™ protocols ACD
Number of inputs
16
Nominal input voltage UIN
24 V DC
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Drill hole spacing
198.5 mm
Test section
24 V supply (communications power and sensor supply, digital inputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
Degree of protection
IP65/IP67
Protective circuit
Overload protection, short-circuit protection of sensor supply
Input filter time
< 1000 µs
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
ECLASS 10.0.1
27242604
ECLASS 11.0
27242604
ETIM 7.0
EC001599
UNSPSC 7.0901
43201404
ECLASS 5.1
27242600
UNSPSC 11
39121311
ECLASS 6.0
27242600
ECLASS 7.0
27242604
UNSPSC 21.0
32151602
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Designation connection point
Copper cable
Protocols supported
SNMP v1
Connection method
M12 connector, double occupancy
Depth
38 mm
Input name
Digital inputs
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ECLASS 5.0
27242200
ECLASS 9.0
27242604
ETIM 3.0
EC001599
ETIM 2.0
EC001433
UNSPSC 12.01
39121311
Equipment type
EtherNet/IP™ slave
Input voltage range "0" signal
0 V ... 5 V DC
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 4.1
27240400
ETIM 6.0
EC001599
ETIM 4.0
EC001599
UNSPSC 19.0
32151602
UNSPSC 20.0
32151602
Supply voltage range
18 V DC ... 31.2 V DC (including all tolerances, including ripple)
Connection technology
4-conductor
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
China RoHS
Environmentally Friendly Use Period = 25;
UNSPSC 6.01
43172015
UNSPSC 13.2
32151602
UNSPSC 18.0
32151602