2701487 Phoenix Contact Programmable Logic Controllers

Product Details

• Height
  185 mm
• Permissible humidity (operation)
  5 % ... 95 %
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Net weight
  709.1 g
• Input filter time
  < 1000 µs
• Input voltage range "1" signal
  11 V DC ... 30 V DC
• Number of positions
  4
• System-specific protocols
  EtherNet/IP™ protocols ACD
• Supply voltage range
  18 V DC ... 31.2 V DC (including all tolerances, including ripple)
• Current consumption
  typ. 30 mA ±15 % (at 24 V DC)
• Input name
  Digital inputs
• Immunity to surge
  Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
• Nominal input voltage UIN
  24 V DC
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Drill hole spacing
  198.5 mm
• Housing material
  Zinc die-cast
• Connection method
  M12 connector, double occupancy
• Transmission speed
  10/100 Mbps (with auto negotiation)
• Protective circuit
  Overload protection, short-circuit protection of outputs yes
• Output voltage
  24 V DC
Nominal load, ohmic
12 W (48 Ω, with nominal voltage)
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
ECLASS 11.0
27242604
ECLASS 6.0
27242600
ETIM 3.0
EC001599
ETIM 4.0
EC001599
UNSPSC 11
39121311
Degree of protection
IP65/IP67
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
ECLASS 10.0.1
27242604
REACh SVHC
Lead 7439-92-1
ECLASS 9.0
27242604
UNSPSC 6.01
43172015
UNSPSC 19.0
32151602
UNSPSC 21.0
32151602
Equipment type
EtherNet/IP™ slave
Specification
CIP Edition 3.11EIP adaptation of CIP 1.12
Description of the input
EN 61131-2 types 1 and 3
Nominal input current at UIN
typ. 3 mA
Nominal output voltage
24 V DC (from voltage UA)
Output current when switched off
max. 20 µA
Input voltage range "0" signal
0 V ... 5 V DC
Interference emission
Noise emission test as per EN 61000-6-4 Class A
Width
60 mm
Note on dimensions
The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
Permissible humidity (storage/transport)
5 % ... 95 %
Mounting type
Wall mounting or DIN rail mounting; both with mounting plate.
Number
2
Designation connection point
Copper cable
Supply voltage
24 V DC
Number of inputs
8
Output name
Digital outputs
Nominal load, inductive
12 VA (1.2 H, 48 Ω, with nominal voltage)
Reverse voltage resistance to short pulses
Reverse voltage proof
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 5.0
27242200
ETIM 7.0
EC001599
UNSPSC 12.01
39121311
Depth
38 mm
Ambient temperature (operation)
-25 °C ... 60 °C
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Designation
Actuators (UA)
Note on the connection method
D-coded
Protocols supported
SNMP v1
Connection technology
3-conductor
Cable length
max. 30 m (To the sensor)
Number of outputs
8
Switching frequency
max. 5500 per second (with at least 50 mA load current)
Output voltage when switched off
max. 1 V
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ECLASS 4.0
27240400
ECLASS 5.1
27242600
ECLASS 7.0
27242604
ETIM 6.0
EC001599
UNSPSC 13.2
32151602
Behavior with overload
Auto restart
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
ECLASS 4.1
27240400
ETIM 2.0
EC001433
UNSPSC 20.0
32151602
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
UNSPSC 18.0
32151602
UNSPSC 7.0901
43201404