2701239 Phoenix Contact Programmable Logic Controllers

Product Details

• Permissible humidity (storage/transport)
  5 % ... 95 % (non-condensing)
• Caption
  Dimensional drawing
• Height
  126.1 mm
• Ambient temperature (operation)
  -25 °C ... 60 °C (Standard, applications with UL approval, use in zone 2 potentially explosive area)
• Note on dimensions
  The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715).
• Description of the input
  EN 61131-2, type 3
• Encoder signals
  Symmetrical and asymmetrical encoders
• Input current
  2.5 mA (per channel)
• Nominal output voltage
  24 V DC
• Current carrying capacity
  typ. 500 mA
• Type of connection of signals
  Push-in connection
• Connection technology
  1-conductor
• Nominal input current at UIN
  2.5 mA (per channel)
• Nominal load, lamp
  max. 12 W (at nominal voltage)
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Width
  53.6 mm
• Depth
  54 mm
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• ECLASS 5.1
  27242600
• UNSPSC 6.01
  43172015
UNSPSC 18.0
32151602
ETIM 7.0
EC001601
UNSPSC 19.0
32151602
Overvoltage category
II (IEC 60664-1, EN 60664-1)
ECLASS 4.1
27240400
ECLASS 9.0
27242605
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Net weight
233.9 g
Mounting type
DIN rail
Degree of pollution
2 (IEC 60664-1, EN 60664-1)
Connection method
Push-in connection
Designation
Asymmetrical incremental encoder
Supply voltage
24 V DC
UNSPSC 13.2
32151602
Type of protection
Short-circuit protection
UNSPSC 21.0
32151602
Input voltage range "0" signal
-3 V DC ... 5 V DC
Input frequency
max. 300 kHz (1 channel wired)
Cable length
< 30 m
Permissible cable length to the sensor
< 30 m
Interference emission
Noise emission test according to EN 61000-6-3 Class B
ECLASS 4.0
27240400
UNSPSC 20.0
32151602
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Input name
Digital inputs
Supply voltage range
19.2 V DC ... 30 V DC including all tolerances, including ripple
Number of 5 V encoder supplies
2 (UE1, UE2)
Voltage range
19.2 V DC ... 30 V DC
Common mode voltage range signal - ground
-10 V ... 13.2 V
ECLASS 11.0
27242605
ECLASS 5.0
27242200
ETIM 3.0
EC001599
ETIM 4.0
EC001435
Degree of protection
IP20
Mounting position
any (no temperature derating)
Current consumption
max. 2.5 A (dependent on the encoder or sensor type used and the load on the digital output.)
Protection
max. 8 A (polarity reversal protection up to 5 A)
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 7.0
27242605
UNSPSC 12.01
39121311
Transmission speed
100 Mbps
Power consumption
max. 60 W (of which 1.6 W internal losses)
Resolution
32 bits
Nominal load, inductive
max. 12 VA (1.2 H, 48 Ω, with nominal voltage)
REACh SVHC
Lead 7439-92-1
UL, USA/Canada
cULus
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 6.0
EC001601
UNSPSC 7.0901
43201404
Number of inputs
8 (CNT: G1, G2, Dir1, Dir2; INC: Ref1, Ref2, L1, L2)
IECEx
Ex ec IIC T4 Gc
ECLASS 10.0.1
27242605
ECLASS 6.0
27242600
Color
traffic grey A RAL 7042
Note on weight specifications
with connectors and bus base module
Number of interfaces
2
Protective circuit
Short-circuit protection
UNSPSC 11
39121311
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Input voltage range "1" signal
11 V DC ... 30 V DC
Encoder types that can be connected
max. 2 (A, B, (Z))
Signal voltage level
Low ≤ 2.5 V, high ≥ 3.5 V (up to 27 V, maximum)
Output voltage
24 V DC
Input voltage
24 V DC
Number of 24 V encoder supplies
2 (US1, US2)
Number of outputs
2 (Out1, Out2)
Nominal load, ohmic
max. 12 W (48 Ω, with nominal voltage)
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
Nominal input voltage UIN
24 V DC
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
ATEX
 II 3 G Ex ec IIC T4 Gc
Encoder supply voltage
5 V DC
Output name
Digital outputs