2700467 Phoenix Contact Electrical Safety Devices

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Rated control circuit supply voltage US
  24 V DC -15 % / +10 %
• Inrush current
  min. 3 mA
• Input name
  Start circuit
• Max. permissible overall conductor resistance
  150 Ω
• Input voltage range "1" signal
  20.4 V DC ... 26.4 V DC
• Output name
  Enabling current paths
• Switching voltage
  min. 12 V AC/DC
• Switching capacity
  min. 60 mW
• Mechanical service life
  10x 106 cycles
• Short-circuit protection
  no
• Typical pickup time at US
  < 250 ms (when controlled via A1)
• Typical response time at US
  < 175 ms (automatic start)
• Mounting position
  vertical or horizontal
• Degree of protection
  IP20
• Housing material
  PBT
• Connection method
  Push-in connection
• Status display
  3 x green LED
• Stripping length
  8 mm
Category
1 (up to Cat. 4 depending on the application)
Standards/regulations
DIN EN 50178
Shock
15g
ECLASS 4.1
40020600
ECLASS 5.1
27371900
UNSPSC 18.0
39122205
UNSPSC 21.0
39122205
Depth
114.5 mm
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Rated control supply current IS
typ. 80 mA
Filter time
max. 1.5 ms (at S12; test pulse width)
Input voltage range "0" signal
0 V DC ... 5 V DC (for safe Off; at S12)
Input current range "0" signal
0 mA ... 2 mA (for safe Off; at S12)
Protective circuit/component
Suppressor diode
Output description
non-safety-related
Limiting continuous current
6 A (observe derating)
Contact material
AgSnO2
Sq. Total current
48 A2 (observe derating)
Voltage
22 V DC (Us - 2 V)
Typical release time at US
< 20 ms (when controlled via A1 or S12)
Net weight
140.4 g
Nominal operating mode
100% operating factor
Assembly instructions
See derating curve
Min. degree of protection of inst. location
IP54
Operating voltage display
1 x green LED
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section AWG
24 ... 16
Safety Integrity Level (SIL)
1 (up to SIL 3 depending on the application)
Rated surge voltage/insulation
Safe isolation, reinforced insulation 6 kV between input circuit and enabling current path (13/14) and enabling current path (23/24) and enabling current path (33/34)Basic insulation 4 kV between all current paths and housing
ECLASS 10.0.1
27371819
ECLASS 6.0
27371800
ETIM 6.0
EC001449
ETIM 7.0
EC001449
Height
116.6 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Designation
Air clearances and creepage distances between the power circuits
Safety Integrity Level Claim Limit (SIL CL)
1 (up to SILCL 3 depending on the application)
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 11.0
27371819
ECLASS 9.0
27371819
UNSPSC 13.2
39121501
Width
12.5 mm
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Stop category
0
Rated insulation voltage
250 V AC
Degree of pollution
2
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
40020600
ECLASS 5.0
27371900
UNSPSC 19.0
39122205
Ambient temperature (operation)
-40 °C ... 55 °C (observe derating)
Maximum altitude
≤ 2000 m (Above sea level)
Power consumption at US
typ. 1.92 W
Protective circuit
Surge protection Suppressor diode
Description of the input
non-safety-related
Current consumption
< 10 mA (at S34/24 V)
Number of inputs
1
Number of outputs
1 (digital, PNP)
Contact type
3 enabling current paths
Switching frequency
0.5 Hz
Output fuse
6 A gL/gG (N/O contact)
Current
max. 100 mA
Maximum inrush current
500 mA (Δt = 1 ms at Us)
Recovery time
< 500 ms
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Mounting type
DIN rail mounting
Housing color
yellow
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
pluggable
Yes
Performance level (PL)
c (up to PL e depending on the application)
Overvoltage category
III
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27371819
UNSPSC 20.0
39122205