2692380 Phoenix Contact Programmable Logic Controllers

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (operation)
  -25 °C ... 60 °C
• Note on weight specifications
  with connectors
• Connection method
  Inline connector
• Equipment type
  Sercos slave
• Power supply unit
  max. 8 A DC (sum of UM + US)
• Connection technology
  3-conductor
• Protective circuit
  Short-circuit and overload protection Freewheeling circuit in the output driver
• Output voltage
  24 V DC -1 V (At nominal current)
• Depth
  71.5 mm
• Permissible humidity (operation)
  10 % ... 95 % (non-condensing)
• Mounting type
  DIN rail mounting
• Net weight
  298 g
• Number of devices with parameter channel
  max. 16
• Supply voltage
  24 V DC (via Inline connector)
• Power consumption
  typ. 3.2 W (entire device)
• Typical response time
  approx. 500 µs
• Input voltage range "0" signal
  -30 V DC ... 5 V DC
• Nominal load, lamp
  12 W
• Nominal load, ohmic
  12 W
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Permissible humidity (storage/transport)
10 % ... 95 % (non-condensing)
Designation
Segment circuit supply (US)
Amount of process data
max. 512 Byte (per station)
Transmission speed
500 kbps / 2 Mbps (automatic detection, no combined system)
Number of supported branch terminals with remote bus branch
0
Nominal input voltage UIN
24 V DC
Nominal input current at UIN
typ. 3 mA
Number of outputs
4
Nominal output voltage
24 V DC
ECLASS 7.0
27242608
Width
80 mm
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Note on dimensions
Specfications with connectors
Color
green
Number of local bus devices that can be connected
max. 61 (The on-board I/Os are two devices)
Device profile
FSP_IO
Current consumption
min. 3 mA (without actuators)
Input name
Digital inputs
Input voltage
24 V DC
Typical input current per channel
typ. 3 mA
Output voltage when switched off
max. 500 mV
Reverse voltage resistance to short pulses
Reverse voltage proof
Interference emission
Noise emission test as per EN 61000-6-4 Class A
ECLASS 10.0.1
27242608
ECLASS 5.0
27250300
ETIM 4.0
EC001599
UNSPSC 12.01
43201404
Height
119.8 mm
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protection
IP20
Diagnostics messages
Short-circuit or overload of the digital outputs Yes
Number
2
Number of supported devices
max. 63 (per station)
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Description of the input
EN 61131-2 type 1
Number of inputs
8
Input voltage range "1" signal
15 V DC ... 30 V DC
Output name
Digital outputs
Output current when switched off
max. 500 µA (When not loaded, a voltage can be measured even at an output that is not set.)
ECLASS 5.1
27242600
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
ECLASS 11.0
27242608
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27250300
ECLASS 9.0
27242608
ETIM 7.0
EC001604
UNSPSC 19.0
32151602
UNSPSC 18.0
32151602
Behavior with inductive overload
Output can be destroyed
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ETIM 3.0
EC001599
Nominal load, inductive
12 VA (1.2 H, 48 Ω)
Limitation of the voltage induced on circuit interruption
approx. -30 V
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion A, all interfaces 1 kVCriterion B, all interfaces 2 kV
ECLASS 6.0
27242600
UNSPSC 6.01
43172015
UNSPSC 11
43172015
UNSPSC 20.0
32151602
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, supply lines DC: 0.5 kV/0.5 kV (symmetrical/asymmetrical), fieldbus cable shield 1 kV
UNSPSC 7.0901
43201404
UNSPSC 21.0
32151602
ECLASS 4.1
27250300
ETIM 6.0
EC001604
UNSPSC 13.2
32151602
Behavior with overload
Auto restart
REACh SVHC
1,2-dimethoxyethane,ethylene glycol dimethyl ether (EGDME) 110-71-4
ETIM 2.0
EC001430