2688899 Phoenix Contact Programmable Logic Controllers

Product Details

• Protocol
  CoE
• Power supply unit
  max. 2 A (up to HW 04)
• Width
  45 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Designation
  Axioline F local bus supply (UBus)
• Conductor cross section flexible min.
  0.2 mm²
• Mounting type
  DIN rail mounting
• Transmission speed
  100 Mbps
• Amount of process data
  1024 Byte (for each data direction)
• Immunity to EF
  Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Degree of protection
  IP20
• Conductor cross section flexible max.
  1.5 mm²
• Conductor cross section solid min.
  0.2 mm²
• Diagnostics messages
  Emergency messages
• Note on dimensions
  The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715).
• Mounting position
  any (observe temperature derating)
• Number of interfaces
  1
• Number of local bus devices that can be connected
  max. 63
• Type of addressing
  Auto-increment addressing
Power consumption
max. 13.7 W (2.0 A at UBus, UL = 24 V, up to HW 04)
ECLASS 5.1
27242600
Note on the connection method
Auto negotiation and autocrossing
Height
126.1 mm
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Stripping length
8 mm
Net weight
219.9 g
System-specific protocols
Mailbox protocols CAN application protocol over EtherCAT®
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Type of protection
Surge protection
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
ECLASS 11.0
27242608
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Conductor cross section AWG min.
24
Conductor cross section AWG max.
16
Depth
74 mm
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Note on weight specifications
with connector and bus base module
Number of supported devices
max. 63 (per station)
Current consumption
max. 570 mA (2.0 A at UBus, UL = 24 V, up to HW 04)
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Interference emission
Noise emission test according to EN 61000-6-3 Class B
Degree of pollution
2 (IEC 60664-1, EN 60664-1)
Transmission physics
Ethernet in RJ45 twisted pair
Specification
ETG.1000 V1.02
Supply voltage
5 V DC (via bus base module)
Ambient temperature (operation)
-25 °C ... 60 °C (Mounting position: wall mounting on horizontal DIN rail)
Connection method
USB type C (as of HW 05)
Conductor cross section solid max.
1.5 mm²
Color
traffic grey A RAL 7042
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
REACh SVHC
Lead 7439-92-1
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 5.0
27242200
ECLASS 9.0
27242608
Overvoltage category
II (IEC 60664-1, EN 60664-1)
ECLASS 6.0
27242600
ETIM 7.0
EC001604
UNSPSC 11
39121311
UNSPSC 19.0
32151602
UNSPSC 13.2
32151602
UNSPSC 21.0
32151602
UNSPSC 7.0901
43201404
UNSPSC 18.0
32151602
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical), fieldbus cable shield: ±1 kV
ECLASS 10.0.1
27242608
ECLASS 4.1
27240400
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27240400
ETIM 3.0
EC001604
ECLASS 7.0
27242608
ETIM 4.0
EC001604
UNSPSC 20.0
32151602
ETIM 6.0
EC001604
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
UNSPSC 6.01
43172015
UNSPSC 12.01
39121311