2688459 Phoenix Contact Programmable Logic Controllers

Product Details

• Degree of protection
  IP20
• Conductor cross section AWG min.
  24
• Conductor cross section flexible min.
  0.2 mm²
• Net weight
  177 g
• Transmission speed
  100 Mbps
• ETIM 3.0
  EC001604
• ECLASS 9.0
  27242608
• UNSPSC 13.2
  32151602
• UNSPSC 21.0
  32151602
• Width
  45 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Power consumption
  max. 14 W (2.0 A at UBus, UL = 24 V, up to HW 04)
• Interference emission
  Noise emission test according to EN 61000-6-3 Class B
• Immunity to EF
  Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
• ECLASS 11.0
  27242608
• ECLASS 5.1
  27242600
• Connection method
  USB type C (as of HW 05)
• Protocol
  Modbus/TCP (UDP)
• Mechanical tests
  Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
• ETIM 6.0
  EC001604
UNSPSC 11
39121311
Note on dimensions
The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715).
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Conductor cross section solid min.
0.2 mm²
Stripping length
8 mm
Mounting position
any (observe temperature derating)
Transmission physics
Ethernet in RJ45 twisted pair
Type of protection
Surge protection
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
ECLASS 4.0
27240400
ECLASS 5.0
27242200
UNSPSC 18.0
32151602
Conductor cross section flexible max.
1.5 mm²
Number of interfaces
1
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Height
126.1 mm
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Note on the connection method
Auto negotiation and autocrossing
Mounting type
DIN rail mounting
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current consumption
max. 583 mA (2.0 A at UBus, UL = 24 V, up to HW 04)
Overvoltage category
II (IEC 60664-1, EN 60664-1)
ECLASS 6.0
27242600
ETIM 7.0
EC001604
UNSPSC 7.0901
43201404
UNSPSC 20.0
32151602
Test section
Ethernet interface 1 / Ethernet interface 2 1500 V AC 50 Hz 1 min.
ECLASS 4.1
27240400
Supply voltage
5 V DC (via bus base module)
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical), fieldbus cable shield: ±1 kV
ETIM 4.0
EC001604
Conductor cross section AWG max.
16
Note on weight specifications
with connector and bus base module
UNSPSC 12.01
39121311
Designation
Axioline F local bus supply (UBus)
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
ECLASS 10.0.1
27242608
Power supply unit
max. 2 A (up to HW 04)
Depth
74 mm
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 7.0
27242608
UNSPSC 6.01
43172015
Ambient temperature (operation)
-25 °C ... 60 °C (Mounting position: wall mounting on horizontal DIN rail)
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Conductor cross section solid max.
1.5 mm²
Color
traffic grey A RAL 7042
Degree of pollution
2 (IEC 60664-1, EN 60664-1)
Number of supported devices
max. 63 (per station)
UNSPSC 19.0
32151602
Number of local bus devices that can be connected
max. 63
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V