2688394 Phoenix Contact Programmable Logic Controllers

Product Details

• Height
  126.1 mm
• Interference emission
  Noise emission test according to EN 61000-6-3 Class B
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Conductor cross section solid max.
  1.5 mm²
• Color
  traffic grey A RAL 7042
• Protocol
  EthernNet/IP
• Supply voltage range
  19.2 V DC ... 30 V DC (including all tolerances, including ripple)
• Power supply unit
  max. 2 A (up to HW 04)
• Ambient temperature (operation)
  -25 °C ... 60 °C (Mounting position: wall mounting on horizontal DIN rail)
• Permissible humidity (storage/transport)
  5 % ... 95 % (non-condensing)
• Stripping length
  8 mm
• Mounting position
  any (observe temperature derating)
• Number of interfaces
  1
• Mechanical tests
  Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
• ECLASS 4.0
  27240400
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section AWG min.
  24
• Immunity to ESD
  Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
• Width
  45 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of protection
IP20
Note on the connection method
Auto negotiation and autocrossing
Conductor cross section flexible min.
0.2 mm²
Note on weight specifications
with connector and bus base module
Number of local bus devices that can be connected
max. 63
Power consumption
max. 14 W (2.0 A at UBus, UL = 24 V, up to HW 04)
Type of protection
Surge protection
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
China RoHS
Environmentally Friendly Use Period = 50 years
Overvoltage category
II (IEC 60664-1, EN 60664-1)
ECLASS 9.0
27242608
ETIM 6.0
EC001604
UNSPSC 6.01
43172015
UNSPSC 13.2
32151602
Note on dimensions
The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715).
Designation
Axioline F local bus supply (UBus)
Conductor cross section AWG max.
16
Degree of pollution
2 (IEC 60664-1, EN 60664-1)
Supply voltage
5 V DC (via bus base module)
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 10.0.1
27242608
ETIM 4.0
EC001604
UNSPSC 7.0901
43201404
UNSPSC 18.0
32151602
UNSPSC 21.0
32151602
Depth
74 mm
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Connection method
USB type C (as of HW 05)
Test section
Ethernet interface 1 / Ethernet interface 2 1500 V AC 50 Hz 1 min.
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical), fieldbus cable shield: ±1 kV
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
ECLASS 5.0
27242200
UNSPSC 11
39121311
UNSPSC 20.0
32151602
ECLASS 11.0
27242608
ETIM 7.0
EC001604
UNSPSC 12.01
39121311
ECLASS 4.1
27240400
ECLASS 5.1
27242600
Current consumption
max. 583 mA (2.0 A at UBus, UL = 24 V, up to HW 04)
Conductor cross section flexible max.
1.5 mm²
Net weight
177 g
Mounting type
DIN rail mounting
Transmission physics
Ethernet in RJ45 twisted pair
ECLASS 7.0
27242608
Transmission speed
100 Mbps
Number of supported devices
max. 63 (per station)
UNSPSC 19.0
32151602
ETIM 3.0
EC001604
ECLASS 6.0
27242600