2688093 Phoenix Contact Programmable Logic Controllers

Product Details

• Width
  53.6 mm
• Mounting type
  DIN rail
• Net weight
  225 g
• Transmission speed
  100 Mbps
• Protective circuit
  Short-circuit protection
• Depth
  54 mm
• Description of the input
  EN 61131-2, type 3
• Input current
  2.5 mA (per channel)
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Degree of pollution
  2 (IEC 60664-1, EN 60664-1)
• Number of interfaces
  2
• Number of inputs
  8 (CNT: G1, G2, Dir1, Dir2; INC: Ref1, Ref2, L1, L2)
• Protection
  max. 8 A (polarity reversal protection up to 5 A)
• Height
  126.1 mm
• Permissible cable length to the sensor
  < 30 m
• Number of 24 V encoder supplies
  2 (US1, US2)
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Degree of protection
  IP20
• Supply voltage
  24 V DC
• Input name
  Digital inputs
Input voltage range "0" signal
-3 V DC ... 5 V DC
Resolution
32 bits
Type of protection
Short-circuit protection
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Designation
Asymmetrical incremental encoder
Encoder supply voltage
5 V DC
Connection technology
1-conductor
Number of outputs
2 (Out1, Out2)
Nominal load, ohmic
max. 12 W (48 Ω, with nominal voltage)
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Overvoltage category
II (IEC 60664-1, EN 60664-1)
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27242605
ECLASS 9.0
27242605
UNSPSC 6.01
43172015
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Note on weight specifications
with connectors and bus base module
Connection method
Push-in connection
Supply voltage range
19.2 V DC ... 30 V DC including all tolerances, including ripple
Input voltage
24 V DC
Input frequency
max. 300 kHz (1 channel wired)
Voltage range
19.2 V DC ... 30 V DC
Encoder types that can be connected
max. 2 (A, B, (Z))
Signal voltage level
Low ≤ 2.5 V, high ≥ 3.5 V (up to 27 V, maximum)
Output name
Digital outputs
Number of 5 V encoder supplies
2 (UE1, UE2)
Encoder signals
Symmetrical and asymmetrical encoders
Common mode voltage range signal - ground
-10 V ... 13.2 V
Nominal load, inductive
max. 12 VA (1.2 H, 48 Ω, with nominal voltage)
Nominal load, lamp
max. 12 W (at nominal voltage)
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 4.0
27240400
ECLASS 5.1
27242600
ECLASS 7.0
27242605
UNSPSC 7.0901
43201404
UNSPSC 19.0
32151602
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
ECLASS 11.0
27242605
ECLASS 4.1
27240400
ECLASS 5.0
27242200
ETIM 6.0
EC001601
ETIM 7.0
EC001601
UNSPSC 13.2
32151602
Power consumption
max. 60 W (of which 1.6 W internal losses)
Cable length
< 30 m
Type of connection of signals
Push-in connection
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
Mounting position
any (no temperature derating)
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Interference emission
Noise emission test according to EN 61000-6-3 Class B
Caption
Dimensional drawing
Ambient temperature (operation)
-25 °C ... 60 °C
Nominal input voltage UIN
24 V DC
Output voltage
24 V DC
Input voltage range "1" signal
11 V DC ... 30 V DC
Note on dimensions
The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715).
Color
traffic grey A RAL 7042
Current consumption
max. 2.5 A (dependent on the encoder or sensor type used and the load on the digital output.)
Nominal input current at UIN
2.5 mA (per channel)
Current carrying capacity
typ. 500 mA
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 4.0
EC001601
UNSPSC 18.0
32151602
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ECLASS 6.0
27242600
UNSPSC 12.01
39121311
UNSPSC 21.0
32151602
Test section
5 V supply of the local bus (UBus) / 24 V supply (I/Os) 500 V AC 50 Hz 1 min.
UNSPSC 20.0
32151602
Nominal output voltage
24 V DC
UNSPSC 11
39121311