2320283 Phoenix Contact UPS (DC)

Product Details

• Height
  130 mm
• Installation distance top/bottom
  50 mm / 50 mm
• Climatic class
  3K3 (EN 60721)
• Nominal input voltage
  100 V AC -10 % / +20 %
• Installation distance right/left
  5 mm / 5 mm
• Ambient temperature (operation)
  -25 °C ... 60 °C (> 50 °C: 2,5 % / K)
• Installation height
  ≤ 3000 m (> 2000 m: 0,6 % / 100 m)
• Power factor (cos phi)
  0.9
• Net weight
  5 kg
• Efficiency
  > 92 % (120 V AC)
• Conductor cross section flexible min.
  0.2 mm²
• Standards/regulations
  EN 62040-1
• Discharge in air
  ± 8 kV
• Degree of protection
  IP20
• Buffer period
  1 h (38 AH)
• POWER BOOST (IBoost)
  13 A (120 V AC)
• Connection method
  Screw connection
• Conductor cross section AWG min.
  30
• Low Voltage Directive
  Conformance with Low Voltage Directive 2014/35/EC
• Frequency range
  0.15 MHz ... 80 MHz
Conducted interference
EN 61000-4-6
Power frequency magnetic field
EN 61000-4-8
ECLASS 9.0
27040705
Contact discharge
± 6 kV
Input
± 2 kV
Depth
125 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Input voltage range
90 V AC ... 264 V AC
Nominal output voltage
100 V AC
Conductor cross section solid min.
0.2 mm²
Standard designation
Uninterruptible power supply systems
Surge voltage load (surge)
EN 61000-4-5
ECLASS 11.0
27040705
ECLASS 6.0
27040600
Width
290 mm
Max. permissible relative humidity (operation)
≤ 95 %
AC frequency range
45 Hz ... 65 Hz
Nominal output current (IN)
7.8 A (100 V AC)
Maximum power dissipation in no-load condition
typ. 17 W (120 V AC)
MTBF (IEC 61709, SN 29500)
217546 h (230 V AC, at 40 °C)
Protection class
I
Conductor cross section AWG max.
12
Stripping length
8 mm
Electrostatic discharge
EN 61000-4-2
Electromagnetic HF field
EN 61000-4-3
Voltage
10 V
Output
± 2 kV
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 7.0
27040602
Permissible backup fuse
B16 230 V AC
Conductor cross section flexible max.
2.5 mm²
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Connection in parallel
Yes, 2
Conductor cross section solid max.
2.5 mm²
Test field strength
100 A/m
Signal
1 kV (asymmetrical)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 5.1
27040603
Connection in series
No
Fast transients (burst)
EN 61000-4-4
ECLASS 10.0.1
27040705
ETIM 6.0
EC000382
Comments
Criterion A
Frequency
50 Hz
ETIM 7.0
EC000382