2320238 Phoenix Contact UPS (DC)

Product Details

• Comments
  Criterion A
• Width
  40 mm
• Depth with alternative assembly
  43 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Fixed backup threshold
  ≤ 22 V DC
• Output voltage range (depends on the input voltage)
  19.2 V DC ... 27.6 V DC (UOUT = UBAT - 0,5 V DC)
• Efficiency
  > 98 % (Mains operation, with charged energy storage)
• Connection method
  Screw connection
• Conductor cross section AWG min.
  24
• Conductor cross section AWG max.
  12
• EMC requirements for noise emission
  EN 61000-6-3
• Frequency range
  0.15 MHz ... 80 MHz
• Height with alternative assembly
  130 mm
• Input voltage
  24 V DC
• Current consumption (charging process)
  6.9 A (Charging, mains operation)
• Nominal output current (IN)
  20 A (-25 °C ... 60 °C)
• Net weight
  0.6 kg
• Assembly instructions
  alignable: horizontal 5 mm, vertical 50 mm
• EMC requirements for noise immunity
  EN 61000-6-1
• Standard - Electrical safety
  EN 60950-1/VDE 0805 (SELV)
UL approvals
UL Listed UL 508
Electromagnetic HF field
EN 61000-4-3
Output
1 kV (Test Level 2 - symmetrical)
I/O/S
asymmetrical
ECLASS 11.0
27040705
ECLASS 4.0
27040600
ECLASS 6.0
27040600
UNSPSC 7.0901
39121011
Height
130 mm
Installation distance right/left
5 mm / 5 mm
Ambient temperature (operation)
-25 °C ... 70 °C
Climatic class
3K3 (in acc. with EN 60721)
POWER BOOST (IBoost)
27 A (-25°C ... 40°C)
IQ technology
Yes
Protection class
III
Conductor cross section solid max.
4 mm²
Stripping length
8 mm
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Electrostatic discharge
EN 61000-4-2
Fast transients (burst)
EN 61000-4-4
Conducted interference
EN 61000-4-6
Criterion A
Normal operating behavior within the specified limits.
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27040600
ETIM 3.0
EC001039
Depth
125 mm
Degree of protection
IP20
Max. permissible relative humidity (operation)
≤ 95 % (25 °C, non-condensing)
Input voltage range
18 V DC ... 30 V DC
Variable connect threshold
1 V/0.1 s
Selective Fuse Breaking (ISFB)
120 A (-25 °C ... 60 °C)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section flexible min.
0.2 mm²
Width with alternative assembly
123 mm
Installation distance top/bottom
50 mm / 50 mm
Nominal input voltage
24 V DC
Current consumption (maximum)
32.9 A (maximum, mains operation)
Nominal output voltage
24 V DC
MTBF (IEC 61709, SN 29500)
> 500000 h (40 °C)
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Input
1 kV (Test Level 2 - symmetrical)
Voltage
10 V (Test Level 3)
ECLASS 5.1
27040600
ECLASS 9.0
27040705
UNSPSC 6.01
30211510
UNSPSC 11
39121011
UNSPSC 21.0
39121011
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Contact discharge
8 kV (Test Level 4)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ETIM 6.0
EC000382
UNSPSC 19.0
39121011
Discharge in air
15 kV (Test Level 4)
Test field strength
3 V/m
Signal
1 kV (Test Level 2 - asymmetrical)
ECLASS 5.0
27040600
ECLASS 7.0
27040603
ETIM 4.0
EC000382
UNSPSC 13.2
39121011
Surge voltage load (surge)
EN 61000-4-5
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 10.0.1
27040705
Screw thread
M4
Rail applications
EN 50121-4
UNSPSC 12.01
39121011
UNSPSC 20.0
39121011
ETIM 7.0
EC000382
UNSPSC 18.0
39121011