2320128 Phoenix Contact DC/DC Converters

Product Details

• Width with alternative assembly
  122 mm
• Height with alternative assembly
  130 mm
• Installation distance right/left (active)
  15 mm / 15 mm (≤ 70 °C)
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Nominal input voltage range
  24 V DC
• Mains buffering time
  > 12 ms (24 V DC)
• Type of protection
  Transient surge protection
• Nominal output current (IN)
  5 A (-25 °C ... 60 °C)
• Selective Fuse Breaking (ISFB)
  30 A (12 ms)
• Connection in series
  yes
• Feedback voltage resistance
  60 V DC
• Active current limitation
  Approximately 7 A
• Control deviation
  < 1 % (change in load, static 10 % ... 90 %)
• Peak switching voltages nominal load
  < 10 mVPP (20 MHz)
• Efficiency
  > 92.5 %
• Mounting position
  horizontal DIN rail NS 35, EN 60715
• Conductor cross section flexible max.
  2.5 mm²
• Conductor cross section flexible min.
  0.2 mm²
• Stripping length
  7 mm
• Standard - Safe isolation
  DIN VDE 0100-410
Electrostatic discharge
EN 61000-4-2
Electromagnetic HF field
EN 61000-4-3
Comments
Criterion A
I/O/S
asymmetrical
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 4.0
27210900
ECLASS 6.0
27210900
ETIM 6.0
EC002046
Depth
125 mm
Installation distance top/bottom
50 mm / 50 mm (≤ 70 °C)
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C derating, 2.5 %/K, startup at -40°C type-tested)
Climatic class
3K3 (in acc. with EN 60721)
Extended input voltage range in operation
14 V DC ... 18 V DC (Derating)
ECLASS 5.1
27210900
UNSPSC 11
39121004
UNSPSC 20.0
39121041
Height
130 mm
Depth with alternative assembly
51 mm
Degree of protection
IP20
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Input voltage range
18 V DC ... 32 V DC
Current consumption
14 A (24 V, IBOOST)
Protective circuit/component
Varistor
Setting range of the output voltage (USet)
30 V DC ... 56 V DC (> 48 V DC, constant capacity restricted)
Connection in parallel
Yes, for redundancy and increased capacity
Protection against overvoltage at the output (OVP)
< 60 V DC
Maximum power dissipation in no-load condition
5.2 W
Net weight
0.9 kg
Protection class
III
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG min.
24
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Rail applications
EN 50121-4
Shipbuilding approval
DNV GL (EMC B)
Fast transients (burst)
EN 61000-4-4
Test field strength
10 V/m
Input
1 kV (Test Level 2 - symmetrical)
Criterion A
Normal operating behavior within the specified limits.
Width
48 mm
Installation distance right/left
0 mm / 0 mm (≤ 70 °C)
Installation distance top/bottom (active)
50 mm / 50 mm (≤ 70 °C)
Ambient temperature (start-up type tested)
-40 °C
Degree of pollution
2
Inrush current
< 15 A (typical)
Input fuse
25 A (internal (device protection))
Nominal output voltage
48 V DC ±1 %
POWER BOOST (IBoost)
6.25 A (-25 °C ... 40 °C permanent, UOUT = 48 V DC )
Derating
60 °C ... 70 °C (2.5%/K)
Max. capacitive load
unlimited
Residual ripple
< 20 mVPP
Power loss nominal load max.
21 W
Insulation voltage input/output
1.5 kV (type test)
Connection method
Pluggable screw connection
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Conductor cross section AWG max.
12
EMC requirements for noise immunity
EN 61000-6-1
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Frequency range
0.15 MHz ... 80 MHz
Output
1 kV (Test Level 2 - symmetrical)
Surge voltage load (surge)
EN 61000-4-5
Voltage
10 V (Test Level 3)
ECLASS 4.1
27210900
ECLASS 9.0
27210901
ETIM 4.0
EC002542
UNSPSC 19.0
39121041
Screw thread
M3
EMC requirements for noise emission
EN 61000-6-3
Standard – Safety extra-low voltage
EN 60950-1 (SELV)
UL approvals
UL/C-UL listed UL 508
Contact discharge
8 kV (Test Level 4)
Discharge in air
15 kV (Test Level 4)
Signal
1 kV (Test Level 2 - asymmetrical)
Conducted interference
EN 61000-4-6
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27210901
ECLASS 7.0
27210901
UNSPSC 6.01
30211502
UNSPSC 13.2
39121041
UNSPSC 18.0
39121041
ECLASS 10.0.1
27210901
ECLASS 5.0
27210900
ETIM 7.0
EC002046
UNSPSC 12.01
39121004
UNSPSC 7.0901
39121004
UNSPSC 21.0
39121041