2320018 Phoenix Contact DC/DC Converters

Product Details

• Width
  22.5 mm
• Installation distance top/bottom
  50 mm / 50 mm (≤ 70 °C)
• Max. permissible relative humidity (operation)
  ≤ 95 % (At +25°C, non-condensing)
• Current consumption
  2.3 A (12 V DC)
• Nominal output current (IN)
  2 A (-25 °C ... 60 °C)
• Maximum power dissipation in no-load condition
  < 1 W
• Net weight
  0.2 kg
• Assembly instructions
  alignable: horizontally 0 mm, vertically 50 mm
• Conductor cross section solid max.
  2.5 mm²
• Screw thread
  M3
• Status display
  "DC OK" LED green
• Tightening torque, min
  0.5 Nm
• UL approvals
  UL/C-UL listed UL 508
• Fast transients (burst)
  EN 61000-4-4
• Voltage dips
  EN 61000-4-11
• ECLASS 10.0.1
  27210901
• ECLASS 11.0
  27210901
• ETIM 7.0
  EC002046
• UNSPSC 13.2
  39121041
• UNSPSC 21.0
  39121041
Depth
107 mm
Nominal input voltage range
12 V DC ... 24 V DC
Inrush current
< 10 A (typical)
Connection in parallel
Yes, for assembling redundant systems and increasing efficiency
Typical response time
< 0.5 s
Power loss nominal load max.
< 4.2 W
MTBF (IEC 61709, SN 29500)
> 2072000 h (40 °C)
Conductor cross section flexible min.
0.2 mm²
Output description
UOUT > 0.9 x UN: High signal
Tightening torque max
0.6 Nm
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Electromagnetic HF field
EN 61000-4-3
ECLASS 4.0
27210900
ECLASS 7.0
27210901
ECLASS 9.0
27210901
UNSPSC 11
39121004
UNSPSC 19.0
39121041
Height
99 mm
Degree of protection
IP20
Ambient temperature (operation)
-25 °C ... 70 °C (> +60°C derating)
Mains buffering time
typ. 4 ms (12 V DC)
Setting range of the output voltage (USet)
5 V DC ... 15 V DC
Protection against overvoltage at the output (OVP)
< 25 V DC
Efficiency
> 88 % (at 24 V DC and nominal values)
Insulation voltage input/output
1.5 kV (type test)
Connection method
Pluggable screw connection
Conductor cross section AWG max.
14
Output name
DC OK active
Note on status display
UOUT > 0.9 x UN: LED ON
EMC requirements for noise immunity
EN 61000-6-1
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Electrostatic discharge
EN 61000-4-2
Surge voltage load (surge)
EN 61000-4-5
ECLASS 4.1
27210900
ECLASS 6.0
27210900
ETIM 4.0
EC002542
UNSPSC 7.0901
39121004
UNSPSC 20.0
39121041
Installation distance right/left
0 mm / 0 mm (≤ 70 °C)
Degree of pollution
2
Climatic class
3K3 (in acc. with EN 60721)
Frequency range DC
0 Hz
Nominal output voltage
12 V DC ±1 %
Derating
60 °C ... 70 °C (2.5%/K)
Feedback voltage resistance
30 V DC
Peak switching voltages nominal load
< 10 mVPP (20 MHz)
Protection class
III
Housing material
Polyamide (PA)
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Stripping length
7 mm
Output voltage
Uout
Standard - Safe isolation
DIN VDE 0100-410
CSA
CSA-C22.2 No. 107.1-01
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
REACh SVHC
Lead 7439-92-1
ETIM 3.0
EC001039
ETIM 6.0
EC002046
UNSPSC 12.01
39121004
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Input voltage range
10 V DC ... 32 V DC (> 10.5 V DC start)
Input fuse
6.3 A (slow-blow, internal)
Connection in series
yes
Residual ripple
< 20 mVPP (20 MHz)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section AWG min.
24
Continuous load current
≤ 20 mA
EMC requirements for noise emission
EN 61000-6-3
Rail applications
EN 50121-4
Conducted interference
EN 61000-4-6
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 5.0
27210900
ECLASS 5.1
27210900
UNSPSC 6.01
30211502
UNSPSC 18.0
39121041