2130017 Phoenix Contact Terminal Blocks

Product Details

• Insulating material
  PA
• Overvoltage category
  III
• Nominal voltage UN
  1000 V
• Result of tight fit on support
  Test passed
• Short circuit stability result
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock form
  Semi-sinusoidal
• Number of connections
  2
• Color
  gray
• Degree of pollution
  3
• Connection in acc. with standard
  CSA
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test turns
  135
• Result of temperature-rise test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Acceleration
  30g
• Connection method
  Bolt connection
• Min. cross section for cable lug connection
  6 mm²
• Cable lug width, max.
  22 mm
• Tightening torque max
  30 Nm
Ambient temperature (storage/transport)
-25 °C ... 55 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
Number of levels
1
Rated surge voltage
8 kV
Insulating material group
II
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Cable lug connection according to standard
DIN 46237:1970-07
Tightening torque, min
25 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Nominal cross section
50 mm²
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
4.73 W
Nominal current IN
150 A
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 32/NS 35
Proof of thermal characteristics (needle flame) effective duration
30 s
Relative insulation material temperature index (Elec., UL 746 B)
125 °C
Width
32 mm
Height NS 35/15
54.5 mm
Bolt diameter
10 mm
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
Operating temperature
-60 °C ... 85 °C
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ETIM 2.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Maximum load current
150 A (with 50 mm² conductor cross section)
Open side panel
No
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Length
95 mm
Max. cross section for cable lug connection
6 mm²
Hole diameter, min.
10.5 mm
Screw thread
M10
Power rail
20 mm x 3 mm
ECLASS 4.0
27141100
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410