1713243 Phoenix Contact Electrical Connectors

Product Details

• Pitch
  25 mm
• Nom. voltage
  1000 V
• Rated voltage (II/2)
  1000 V
• Single-conductor/terminal point multi-stranded
  25 mm² ... 95 mm²
• 2 conductors with the same cross section, stranded
  16 mm² ... 35 mm²
• Surface characteristics
  tin-plated
• Flammability rating according to UL 94
  V0
• Plate thickness
  1 mm ... 4 mm
• Pieces per package
  10
• Test for conductor damage and slackening
  IEC 60947-7-1:2009-04
• Rated current
  232 A
• Minimum clearance - inhomogeneous field (II/2)
  5.5 mm
• Minimum creepage distance value (II/2)
  5.5 mm
• Sweep speed
  1 octave/min
• ECLASS 11.0
  27141134
• ECLASS 6.0
  27141100
• ETIM 7.0
  EC001283
• Number of potentials
  1
• Rated voltage (III/2)
  1000 V
• Connection method
  Cable lug connection
2 conductors with same cross section, flexible, with ferrule without plastic sleeve
16 mm² ... 35 mm²
Cable lug connection according to standard
DIN 46234:1980-03 25 mm² 95 mm² M10 10 Nm 12 Nm
Insulating material
PA
Range of articles
UW 95-POT
Denomination packing units
Pcs.
Ambient temperature (assembly)
-5 °C ... 100 °C
Test specification
IEC 60947-7-1
Specification
IEC 60695-2-11:2014-02
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test duration per axis
2.5 h
ECLASS 5.1
27141100
Number of connections
2
Rated voltage (III/3)
1000 V
Rated surge voltage (II/2)
6 kV
Conductor cross section flexible, with ferrule without plastic sleeve
25 mm² ... 95 mm²
Internal cylindrical gage
A12 / B12
Contact material
Al alloy
CTI according to IEC 60112
600
Temperature for the ball pressure test according to EN 60695-10-2
125 °C
Width [ w ]
25 mm
Type of note
Notes on safety
Conductor cross section
95 mm²
Minimum clearance - inhomogeneous field (III/2)
8 mm
Frequency
10 - 150 - 10 Hz
Time of exposure
30 s
ETIM 6.0
EC001283
Number of positions
1
Maximum load current
232 A (with 95 mm² conductor cross section)
Rated surge voltage (III/2)
8 kV
Conductor cross section flexible
35 mm² ... 95 mm²
2 conductors with same cross section, flexible
16 mm² ... 35 mm²
Torque
10 Nm ... 12 Nm
Insulating material group
I
Glow wire ignition temperature GWIT according to EN 60695-2-13
775
Type of packaging
packed in cardboard
Ambient temperature (operation)
-40 °C ... 100 °C (Depending on the current carrying capacity/derating curve)
Pull-out test
IEC 60947-7-1:2009-04
Clearances and creepage distances
IEC 60947-1:2007-06 + A1:2010-12
Minimum creepage distance value (III/2)
8 mm
Safety note
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prev
Acceleration
5 g (60.1 - 150 Hz)
ECLASS 10.0.1
27141134
ECLASS 9.0
27141134
Brief article description
Panel feed-through terminal block
Nominal current
232 A
Rated surge voltage (III/3)
8 kV
Connection direction of the conductor to plug-in direction
0 °
Conductor cross section, flexible, with ferrule, with plastic sleeve
25 mm² ... 95 mm²
Stripping length
27 mm
Note
The cable entry funnel is not touch-proof. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch proofness.
Housing color
gray (7042)
Glow wire flammability index GWFI according to EN 60695-2-12
850
Caption
Type: UW 95-POT(-F)/S
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Conductor cross section / conductor type / tensile force
25 mm² / solid / > 135 N
Minimum clearance - inhomogeneous field (III/3)
8 mm
Minimum creepage distance value (III/3)
12.5 mm
Connection in acc. with standard
IEC 60947-7-1
Amplitude
0.35 mm (10 - 60.1 Hz)
Temperature
960 °C
ECLASS 5.0
27141100
ECLASS 7.0
27141134