1559835 Phoenix Contact Data & Networking Devices

Product Details

• AWG signal line
  20
• Shielding
  Plastic-coated aluminum foil, tinned copper braided shield
• Conductor resistance
  31.2 Ω/km
• REACh SVHC
  Lead 7439-92-1
• UNSPSC 6.01
  31251501
• UNSPSC 13.2
  39121413
• UNSPSC 20.0
  39121413
• Coding
  A - standard
• Insertion/withdrawal cycles
  > 100
• Contact surface material
  Ni/Au
• Sealing material
  FKM
• ECLASS 11.0
  27440102
• ECLASS 5.0
  27143400
• Cable type
  CC-Link
• Shielded
  yes
• ECLASS 6.0
  27279200
• Rated surge voltage
  2.5 kV
• Overvoltage category
  II
• Contact material
  CuZn
• External cable diameter D
  7.7 mm
Conductor material
Bare Cu litz wires
ETIM 6.0
EC002061
UNSPSC 18.0
39121413
Cable weight
78.8 kg/km
ETIM 3.0
EC002061
Insulation resistance
≥ 10 MΩ
Contact carrier material
PA 6.6
Cable structure
3xAWG20/7 + 1xAWG22/19 (filler litz wire)
Conductor structure signal line
7x 0.28 mm
Wave impedance
110 Ω
ECLASS 10.0.1
27440102
UNSPSC 7.0901
31251501
Flammability rating according to UL 94
V0
ECLASS 9.0
27440102
Number of positions
4
Status display
No
Cable type (abbreviation)
990
External sheath, color
red
Smallest bending radius, fixed installation
77 mm
UNSPSC 11
31251501
Nominal voltage, cable
300 V
Wire colors
white, yellow, blue
ECLASS 4.0
27140800
ETIM 4.0
EC000830
Degree of pollution
3
Torque
2 Nm ... 3 Nm (Installation-side)
Conductor cross section
0.5 mm²
ECLASS 7.0
27440103
Optical shield covering
78 %
Outer sheath, material
PVC
Material conductor insulation
foamed PE, with high density
UNSPSC 19.0
39121413
Ambient temperature (operation)
-30 °C ... 60 °C (cable, fixed installation)
Length of cable
2 m
ECLASS 4.1
27140800
ECLASS 5.1
27143400
UNSPSC 21.0
39121413
Degree of protection
IP67 (When plugged in)
Rated voltage
250 V
Signal type/category
CC link, 10 Mbps
Material, knurls
Nickel-plated brass
China RoHS
Environmentally Friendly Use Period = 50 years
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Rated current at 40°C
4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
Thickness, insulation
0.89 mm (Outer cable sheath)
UNSPSC 12.01
31251501
Working capacitance
61 pF