1558522 Phoenix Contact Data & Networking Devices

Product Details

• Material, knurls
  Zinc die-cast, nickel-plated
• ECLASS 10.0.1
  27440102
• ECLASS 5.1
  27143400
• ETIM 4.0
  EC002061
• Number of positions
  4
• Status display
  No
• REACh SVHC
  Lead 7439-92-1
• Rated current at 40°C
  4 A
• Thread type
  Pg9
• Sealing material
  FKM
• ECLASS 11.0
  27440102
• ECLASS 7.0
  27440103
• ECLASS 6.0
  27279200
• UNSPSC 13.2
  39121413
• Contact material
  CuZn
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 5.0
  27143400
• ETIM 3.0
  EC002061
• UNSPSC 7.0901
  31251501
• UNSPSC 20.0
  39121413
Mounting type
Rear mounting Pg9 With flat nut
Contact surface material
Au
Standards/specifications
M12 connector IEC 61076-2-101
ECLASS 4.0
27140800
UNSPSC 6.01
31251501
UNSPSC 21.0
39121413
UNSPSC 18.0
39121413
Ambient temperature (operation)
-25 °C ... 85 °C (Plug / socket)
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Length of the solder pin
12 mm
Rated voltage
250 V
Insulation resistance
≥ 100 MΩ
Connection method
Solder pins
UNSPSC 19.0
39121413
Degree of protection
IP67 (When plugged in)
Rated surge voltage
2.5 kV
Degree of pollution
3
Torque
3 Nm ... 4 Nm (Installation-side)
Coding
A - standard
Insertion/withdrawal cycles
> 100
Standards/regulations
M12 connector IEC 61076-2-101
Overvoltage category
II
Flammability rating according to UL 94
V0
Contact carrier material
PA 6.6
ECLASS 4.1
27140800
ECLASS 9.0
27440102
ETIM 6.0
EC002061
UNSPSC 12.01
31251501
UNSPSC 11
31251501