1534614 Phoenix Contact Data & Networking Devices

Product Details

• Sealing material
  NBR
• AWG signal line
  26
• External sheath, color
  water blue RAL 5021
• Cable weight
  42 kg/km
• Near end crosstalk attenuation (NEXT)
  65.3 dB (with 1 MHz)
• ECLASS 9.0
  27440102
• UNSPSC 11
  31251501
• Length of cable
  5 m
• Rated current at 40°C
  4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
• Status display
  No
• Material, knurls
  Nickel-plated brass
• Insulation resistance
  ≥ 500 MΩ*km
• Overvoltage category
  II
• Transmission characteristics (category)
  CAT5
• Loop resistance
  ≤ 290.00 Ω/km
• ECLASS 4.1
  27140800
• ETIM 3.0
  EC002061
• Contact carrier material
  PA 6.6
• UNSPSC 7.0901
  31251501
• UNSPSC 19.0
  39121413
Conductor cross section
2x 2x 0.14 mm²
Wire colors
white/orange-orange, white/green-green
Core diameter including insulation
0.98 mm
Optical shield covering
70 %
Conductor material
Bare Cu litz wires
Contact material
CuZn
Standards/specifications
Electrical requirements EN 50288-2-2
Cable structure
2x2xAWG26/7; SF/UTP
Twisted pairs
2 cores to the pair
Tensile strength GRP
≤ 80 N
Material conductor insulation
Foamed PE
ECLASS 4.0
27140800
ECLASS 7.0
27440103
ECLASS 5.1
27143400
ETIM 4.0
EC000830
Flammability rating according to UL 94
V0
UL AWM style
20963 (80°C/30 V)
Cable type
Ethernet flexible CAT5, 2-pair
Overall twist
Two pairs with two fillers to the core
Outer sheath, material
PUR
Signal runtime
5.3 ns/m
ECLASS 5.0
27143400
ETIM 2.0
EC001297
Number of positions
4
Minimum bending radius, fixed installation
4 x D
Degree of pollution
3
ECLASS 6.0
27279200
ETIM 6.0
EC002061
Outer sheath thickness
1.2 mm
Minimum bending radius, flexible installation
8 x D
Wave impedance
100 Ω ±5 Ω (at 100 MHz)
Shielded
yes
Standards/regulations
M12 connector IEC 61076-2-101
Test voltage
2500 V
Cable type (abbreviation)
93E
UNSPSC 12.01
31251501
Conductor structure signal line
7x 0.16 mm
Shielding
Aluminum-coated foil, tinned copper braided shield
Coding
D - data
Attenuation
3.2 dB (with 1 MHz)
External cable diameter D
6.4 mm ±0.2 mm
Cable capacity
approx. 45 nF/km (at 1 kHz)
Rated voltage
48 V AC
Degree of protection
IP67 (When plugged in)
Coupling resistance
≤ 100.00 mΩ/m (at 10 MHz)
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Power-summated near end crosstalk attenuation (PSNEXT)
62.3 dB (with 1 MHz)
Test voltage Core/Shield
700 V (50 Hz, 1 min.)
Ambient temperature (operation)
-40 °C ... 80 °C (cable, fixed installation)
UNSPSC 18.0
39121413
UNSPSC 20.0
39121413
Contact surface material
Ni/Au
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
UNSPSC 21.0
39121413
Test voltage Core/Core
700 V (50 Hz, 1 min.)
UNSPSC 6.01
31251501
Signal type/category
Ethernet CAT5 (IEC 11801), 100 Mbps
UNSPSC 13.2
39121413
Resistance to oil
according to EN 60811-2-1
REACh SVHC
Lead 7439-92-1
Halogen-free
according to IEC 60754-1
China RoHS
Environmentally Friendly Use Period = 50 years
Flame resistance
according to IEC 60332-1-2
Ambient temperature (storage/transport)
-20 °C ... 80 °C
Ambient temperature (installation)
-20 °C ... 80 °C
Current carrying capacity of cable
2 A (according to DIN VDE 0891-1)
Return loss (RL)
23 dB (at 4 МHz)
Nominal voltage, cable
≤ 100 V (Peak value, not for high-power applications)
ECLASS 10.0.1
27440102
ECLASS 11.0
27440102