1534588 Phoenix Contact Data & Networking Devices

Product Details

• Contact carrier material
  PA 6.6
• Ambient temperature (operation)
  -40 °C ... 80 °C (cable, fixed installation)
• Insulation resistance
  ≥ 500 MΩ*km
• Standards/regulations
  M12 connector IEC 61076-2-101
• Degree of pollution
  3
• Core diameter including insulation
  0.98 mm
• Note
  The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
• Coding
  D - data
• Transmission characteristics (category)
  CAT5
• Sealing material
  NBR
• Cable type
  Ethernet flexible CAT5, 2-pair
• AWG signal line
  26
• Contact surface material
  Ni/Au
• Standards/specifications
  Electrical requirements EN 50288-2-2
• UL AWM style
  20963 (80°C/30 V)
• Conductor structure signal line
  7x 0.16 mm
• Outer sheath thickness
  1.2 mm
• ETIM 6.0
  EC002061
• Length of cable
  0.5 m
• Number of positions
  4
Signal type/category
Ethernet CAT5 (IEC 11801), 100 Mbps
Flammability rating according to UL 94
V0
Material, knurls
Nickel-plated brass
Minimum bending radius, fixed installation
4 x D
Current carrying capacity of cable
2 A (according to DIN VDE 0891-1)
Ambient temperature (installation)
-20 °C ... 80 °C
ECLASS 6.0
27279200
Resistance to oil
according to EN 60811-2-1
ECLASS 9.0
27440102
UNSPSC 7.0901
31251501
Contact material
CuZn
External cable diameter D
6.4 mm ±0.2 mm
Tensile strength GRP
≤ 80 N
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27440102
ECLASS 5.1
27143400
ETIM 4.0
EC000830
UNSPSC 11
31251501
UNSPSC 13.2
39121413
Coupling resistance
≤ 100.00 mΩ/m (at 10 MHz)
Return loss (RL)
23 dB (at 4 МHz)
Shielded
yes
ECLASS 4.0
27140800
ECLASS 11.0
27440102
ETIM 3.0
EC002061
ECLASS 5.0
27143400
Conductor cross section
2x 2x 0.14 mm²
Degree of protection
IP67 (When plugged in)
Rated voltage
48 V AC
Status display
No
Twisted pairs
2 cores to the pair
Wave impedance
100 Ω ±5 Ω (at 100 MHz)
Test voltage Core/Core
700 V (50 Hz, 1 min.)
Halogen-free
according to IEC 60754-1
ECLASS 4.1
27140800
ETIM 2.0
EC001297
UNSPSC 12.01
31251501
UNSPSC 19.0
39121413
Rated current at 40°C
4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
Overvoltage category
II
Cable type (abbreviation)
93E
Cable structure
2x2xAWG26/7; SF/UTP
Minimum bending radius, flexible installation
8 x D
Conductor material
Bare Cu litz wires
Signal runtime
5.3 ns/m
ECLASS 7.0
27440103
UNSPSC 20.0
39121413
Test voltage
2500 V
Overall twist
Two pairs with two fillers to the core
Shielding
Aluminum-coated foil, tinned copper braided shield
Cable capacity
approx. 45 nF/km (at 1 kHz)
Near end crosstalk attenuation (NEXT)
65.3 dB (with 1 MHz)
Test voltage Core/Shield
700 V (50 Hz, 1 min.)
UNSPSC 18.0
39121413
Ambient temperature (storage/transport)
-20 °C ... 80 °C
Wire colors
white/orange-orange, white/green-green
Optical shield covering
70 %
Outer sheath, material
PUR
Loop resistance
≤ 290.00 Ω/km
Attenuation
3.2 dB (with 1 MHz)
Flame resistance
according to IEC 60332-1-2
China RoHS
Environmentally Friendly Use Period = 50 years
External sheath, color
water blue RAL 5021
Power-summated near end crosstalk attenuation (PSNEXT)
62.3 dB (with 1 MHz)
UNSPSC 6.01
31251501
UNSPSC 21.0
39121413
Cable weight
42 kg/km
Nominal voltage, cable
≤ 100 V (Peak value, not for high-power applications)
Material conductor insulation
Foamed PE
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.