1534562 Phoenix Contact Electrical Connectors

Product Details

• Note
  The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
• Rated voltage
  48 V AC
• Signal type/category
  INTERBUS
• Flammability rating according to UL 94
  V0
• Sealing material
  FKM
• Cable structure
  3 x 2 x 0.22 mm²
• Twisted pairs
  2 cores to the pair
• Minimum bending radius, fixed installation
  7.5 x D
• Traversing rate
  1.6 m/s
• Conductor material
  Bare Cu litz wires
• Attenuation
  ≤ 15 dB/km (at 256 kHz)
• Test voltage Core/Shield
  1000 Vrms
• ECLASS 10.0.1
  27440102
• ECLASS 5.1
  27143400
• ETIM 3.0
  EC002061
• UNSPSC 11
  31251501
• UNSPSC 20.0
  39121413
• Rated current at 40°C
  4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
• Coding
  B - inverse
• Degree of pollution
  3
Contact material
CuZn
Standards/specifications
M12 connector IEC 61076-2-101
Conductor cross section
3x 2x 0.22 mm²
Overall twist
3 pairs to the core
Minimum bending radius, flexible installation
15 x D
Acceleration
3.2 m/s²
Loop resistance
≤ 159.80 Ω/km
Signal speed
0.66 c
Flame resistance
according to VDE 0472, Part 4, test type B
ECLASS 11.0
27440102
ECLASS 6.0
27279200
ETIM 4.0
EC000830
UNSPSC 12.01
31251501
UNSPSC 21.0
39121413
Length of cable
2 m
Rated surge voltage
1.5 kV
Standards/regulations
M12 connector IEC 61076-2-101
Test voltage
2500 V
Contact surface material
Ni/Au
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
AWG signal line
24
Shielding
Braided copper wires
Number of bending cycles
5000000
Cable weight
70 kg/km
Cable capacity
≤ 60 nF/km (At 800 Hz)
Nominal voltage, cable
250 V (Peak value, not for high-power applications)
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27140800
ECLASS 9.0
27440102
UNSPSC 6.01
31251501
UNSPSC 18.0
39121413
Ambient temperature (operation)
-40 °C ... 80 °C (cable, fixed installation)
Number of positions
5
Status display
No
Insertion/withdrawal cycles
> 100
Contact carrier material
PA 6.6
Cable type
INTERBUS
Conductor structure signal line
32x 0.10 mm
External sheath, color
may green RAL 6017
Bending radius
120 mm
Outer sheath, material
PUR
Wave impedance
120 Ω ±20 % (at 64 kHz)
Coupling resistance
< 250.00 mΩ/m (at 30 MHz)
Shielded
yes
ECLASS 4.0
27140800
ECLASS 7.0
27440103
ETIM 6.0
EC002061
UNSPSC 13.2
39121413
Degree of protection
IP67 (When plugged in)
Insulation resistance
≥ 5 GΩ*km
Overvoltage category
II
Torque
2 Nm ... 3 Nm (Installation-side)
Material, knurls
Nickel-plated brass
Cable type (abbreviation)
900
Wire colors
Green-yellow, white-brown, gray-pink
External cable diameter D
8 mm
Traversing path
10 m
Material conductor insulation
PE
Near end crosstalk attenuation (NEXT)
≥ 61 dB (at 772 kHz)
Test voltage Core/Core
1500 Vrms
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27143400
ETIM 2.0
EC001297
UNSPSC 7.0901
31251501
UNSPSC 19.0
39121413