1534478 Phoenix Contact Data & Networking Devices

Product Details

• Twisted pairs
  2 cores to the pair
• Overvoltage category
  II
• Contact surface material
  Ni/Au
• UL AWM style
  21198 (80°C/300 V)
• Number of bending cycles
  5000000
• Acceleration
  3 m/s²
• Rated surge voltage
  1.5 kV
• AWG signal line
  24
• Shielding
  Tinned copper braided shield
• UNSPSC 18.0
  39121413
• Degree of pollution
  3
• Contact material
  CuZn
• Sealing material
  FKM
• Cable structure
  2xAWG24/19+2xAWG22/19
• Conductor structure signal line
  19x 0.13 mm
• Traversing path
  4.5 m
• Cable weight
  90 kg/km
• Outer sheath, material
  PUR
• Conductor structure, voltage supply
  19x 0.15 mm
• UNSPSC 20.0
  39121413
Signal type/category
CANopen®
Insertion/withdrawal cycles
> 100
Cable type
CANopen®/DeviceNet™, PUR, violet
Material, knurls
Nickel-plated brass
AWG power supply
22
Overall twist
2 pairs around a drain wire in the center to the core
External cable diameter D
6.7 mm ±0.3 mm
Traversing rate
3 m/s
Loop resistance
≤ 181.80 Ω/km (Data cable)
Type of pair shielding
Plastic-coated aluminum foil, aluminum side outside
UNSPSC 13.2
39121413
Coding
A - standard
Contact carrier material
PA 6.6
Cable type (abbreviation)
920
Core diameter including insulation
1.95 mm ±0.05 mm (Data cable)
Torque
2 Nm ... 3 Nm (Installation-side)
UNSPSC 19.0
39121413
Status display
No
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Conductor cross section
2x 0.25 mm² (Data cable)
Number of positions
5
Wire colors
Red-black, blue-white
Optical shield covering
80 %
Bending radius
70 mm
Conductor material
Tin-plated Cu litz wires
Degree of protection
IP67 (When plugged in)
Standards/specifications
M12 connector IEC 61076-2-101
Nominal voltage, cable
≤ 300 V (Peak value, not for high-power applications)
Test voltage Core/Shield
2000 V (50 Hz, 1 min.)
Standards/regulations
M12 connector IEC 61076-2-101
Flammability rating according to UL 94
V0
Attenuation
≤ 22.9 dB/km (with 1 MHz)
ECLASS 7.0
27440103
ETIM 6.0
EC002061
UNSPSC 7.0901
31251501
Rated voltage
48 V AC
Halogen-free
in accordance with DIN VDE 0472 part 815
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27440102
Shielded
yes
Length of cable
1 m
Rated current at 40°C
4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
Test voltage
2500 V
Cable capacity
nom. 40 nF/km (Data cable)
ETIM 2.0
EC001297
ETIM 3.0
EC002061
UNSPSC 12.01
31251501
UNSPSC 21.0
39121413
Ambient temperature (operation)
-40 °C ... 80 °C (cable, fixed installation)
Test voltage Core/Core
2000 V (50 Hz, 1 min.)
Flame resistance
UL 1581, Sec. 1060 (FT-1)
ECLASS 11.0
27440102
ECLASS 4.1
27140800
Insulation resistance
≥ 5 GΩ*km (Data cable)
External sheath, color
violet RAL 4001
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Minimum bending radius, flexible installation
10 x D
ECLASS 9.0
27440102
ETIM 4.0
EC000830
UNSPSC 6.01
31251501
UNSPSC 11
31251501
Ambient temperature (storage/transport)
-40 °C ... 80 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27140800
ECLASS 6.0
27279200
Minimum bending radius, drag chain applications
10 x D
Wave impedance
120 Ω ±10 % (with 1 MHz)
ECLASS 5.0
27143400
Minimum bending radius, fixed installation
5 x D
Other resistance
Low adhesion
Material conductor insulation
Foamed PE (Data cable)
ECLASS 5.1
27143400