1525717 Phoenix Contact Data & Networking Devices

Product Details

• UL AWM style
  21198 (80°C/300 V)
• Rated current at 40°C
  4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
• Overvoltage category
  II
• Thread type
  M16 x 1.5
• Contact carrier material
  PA 6.6
• AWG signal line
  24
• Core diameter including insulation
  1.95 mm ±0.05 mm (Data cable)
• Optical shield covering
  80 %
• External cable diameter D
  6.7 mm ±0.3 mm
• Traversing rate
  3 m/s
• Attenuation
  ≤ 22.9 dB/km (with 1 MHz)
• Test voltage Core/Core
  2000 V (50 Hz, 1 min.)
• Other resistance
  Low adhesion
• ECLASS 5.0
  27143400
• ETIM 2.0
  EC001297
• UNSPSC 7.0901
  31251501
• UNSPSC 18.0
  39121413
• UNSPSC 21.0
  39121413
• Material, knurls
  Nickel-plated brass
• Type of pair shielding
  Plastic-coated aluminum foil, aluminum side outside
Length of cable
10 m
Coding
A - standard
Standards/regulations
M12 connector IEC 61076-2-101
Test voltage
2500 V
Contact material
CuZn
Cable type (abbreviation)
920
External sheath, color
violet RAL 4001
Minimum bending radius, drag chain applications
10 x D
Loop resistance
≤ 181.80 Ω/km (Data cable)
Cable weight
90 kg/km
Nominal voltage, cable
≤ 300 V (Peak value, not for high-power applications)
ECLASS 9.0
27440102
ETIM 4.0
EC000830
UNSPSC 11
31251501
UNSPSC 20.0
39121413
Flame resistance
UL 1581, Sec. 1060 (FT-1)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27140800
Degree of protection
IP67
Number of positions
5
Signal type/category
CANopen®
Connection method
CAN Bus / DeviceNet
Flammability rating according to UL 94
V0
Standards/specifications
M12 connector IEC 61076-2-101
Conductor structure signal line
19x 0.13 mm
Twisted pairs
2 cores to the pair
Shielding
Tinned copper braided shield
Traversing path
4.5 m
Number of bending cycles
5000000
Outer sheath, material
PUR
Halogen-free
in accordance with DIN VDE 0472 part 815
REACh SVHC
Lead 7439-92-1
UNSPSC 19.0
39121413
Cable capacity
nom. 40 nF/km (Data cable)
Ambient temperature (operation)
-40 °C ... 80 °C (cable, fixed installation)
Rated voltage
48 V AC
Status display
No
Mounting type
Front mounting M16 x 1.5
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Conductor cross section
2x 0.25 mm² (Data cable)
Cable structure
2xAWG24/19+2xAWG22/19
Conductor structure, voltage supply
19x 0.15 mm
Overall twist
2 pairs around a drain wire in the center to the core
Minimum bending radius, flexible installation
10 x D
Material conductor insulation
Foamed PE (Data cable)
Test voltage Core/Shield
2000 V (50 Hz, 1 min.)
ECLASS 10.0.1
27440102
ECLASS 4.0
27140800
ECLASS 5.1
27143400
ECLASS 7.0
27440103
UNSPSC 12.01
31251501
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Insulation resistance
≥ 5 GΩ*km (Data cable)
Degree of pollution
3
Contact surface material
Ni/Au
Cable type
CANopen®/DeviceNet™, PUR, violet
AWG power supply
22
Wire colors
Red-black, blue-white
Bending radius
70 mm
Minimum bending radius, fixed installation
5 x D
Acceleration
3 m/s²
Conductor material
Tin-plated Cu litz wires
Wave impedance
120 Ω ±10 % (with 1 MHz)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Shielded
yes
ECLASS 11.0
27440102
ETIM 6.0
EC002061
ECLASS 6.0
27279200
UNSPSC 6.01
31251501
UNSPSC 13.2
39121413
ETIM 3.0
EC002061