1525694 Phoenix Contact Data & Networking Devices

Product Details

• Ambient temperature (operation)
  -40 °C ... 80 °C (cable, fixed installation)
• Degree of protection
  IP67
• Coding
  A - standard
• Rated current at 40°C
  4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
• Rated voltage
  48 V AC
• Insulation resistance
  ≥ 5 GΩ*km (Data cable)
• Degree of pollution
  3
• Mounting type
  Front mounting M16 x 1.5 With locking nut
• Contact carrier material
  PA 6.6
• Sealing material
  NBR
• Rated surge voltage
  1.5 kV
• Status display
  No
• Torque
  3 Nm ... 4 Nm (Installation-side)
• Signal type/category
  CANopen®
• Connection method
  CAN Bus / DeviceNet
• Traversing path
  4.5 m
• Minimum bending radius, flexible installation
  10 x D
• Number of positions
  5
• Conductor structure, voltage supply
  19x 0.15 mm
• Cable structure
  2xAWG24/19+2xAWG22/19
Length of cable
2 m
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Contact material
CuZn
Flammability rating according to UL 94
V0
Bending radius
70 mm
Cable weight
90 kg/km
Nominal voltage, cable
≤ 300 V (Peak value, not for high-power applications)
Halogen-free
in accordance with DIN VDE 0472 part 815
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27440103
ETIM 4.0
EC000830
UNSPSC 11
31251501
UNSPSC 12.01
31251501
Cable type (abbreviation)
920
AWG power supply
22
Wave impedance
120 Ω ±10 % (with 1 MHz)
Cable capacity
nom. 40 nF/km (Data cable)
Other resistance
Low adhesion
Ambient temperature (storage/transport)
-40 °C ... 80 °C
ECLASS 11.0
27440102
ECLASS 9.0
27440102
Insertion/withdrawal cycles
> 100
Thread type
M16 x 1.5
Standards/specifications
M12 connector IEC 61076-2-101
UL AWM style
21198 (80°C/300 V)
Conductor structure signal line
19x 0.13 mm
Number of bending cycles
5000000
Minimum bending radius, drag chain applications
10 x D
Outer sheath, material
PUR
Flame resistance
UL 1581, Sec. 1060 (FT-1)
Shielded
yes
ECLASS 4.0
27140800
ECLASS 5.0
27143400
ECLASS 5.1
27143400
ETIM 6.0
EC002061
UNSPSC 21.0
39121413
Test voltage
2500 V
Contact surface material
Ni/Au
AWG signal line
24
Wire colors
Red-black, blue-white
Minimum bending radius, fixed installation
5 x D
Acceleration
3 m/s²
Conductor material
Tin-plated Cu litz wires
Attenuation
≤ 22.9 dB/km (with 1 MHz)
Test voltage Core/Shield
2000 V (50 Hz, 1 min.)
ECLASS 10.0.1
27440102
ECLASS 4.1
27140800
ETIM 3.0
EC002061
UNSPSC 6.01
31251501
Standards/regulations
M12 connector IEC 61076-2-101
Overvoltage category
II
Material, knurls
Zinc die-cast, nickel-plated
Cable type
CANopen®/DeviceNet™, PUR, violet
Conductor cross section
2x 0.25 mm² (Data cable)
Core diameter including insulation
1.95 mm ±0.05 mm (Data cable)
Traversing rate
3 m/s
Material conductor insulation
Foamed PE (Data cable)
Loop resistance
≤ 181.80 Ω/km (Data cable)
Test voltage Core/Core
2000 V (50 Hz, 1 min.)
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27279200
ETIM 2.0
EC001297
UNSPSC 13.2
39121413
UNSPSC 19.0
39121413
Twisted pairs
2 cores to the pair
Overall twist
2 pairs around a drain wire in the center to the core
UNSPSC 7.0901
31251501
Shielding
Tinned copper braided shield
UNSPSC 20.0
39121413
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Optical shield covering
80 %
External sheath, color
violet RAL 4001
UNSPSC 18.0
39121413
Type of pair shielding
Plastic-coated aluminum foil, aluminum side outside
External cable diameter D
6.7 mm ±0.3 mm