1525681 Phoenix Contact Data & Networking Devices

Product Details

• Note
  The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
• Status display
  No
• Overvoltage category
  II
• Insertion/withdrawal cycles
  > 100
• Contact carrier material
  PA 6.6
• Cable type (abbreviation)
  920
• AWG signal line
  24
• Conductor structure signal line
  19x 0.13 mm
• Standards/specifications
  M12 connector IEC 61076-2-101
• Safety note
  WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• Cable structure
  2xAWG24/19+2xAWG22/19
• Type of pair shielding
  Plastic-coated aluminum foil, aluminum side outside
• External sheath, color
  violet RAL 4001
• Acceleration
  3 m/s²
• Ambient temperature (operation)
  -40 °C ... 80 °C (cable, fixed installation)
• Standards/regulations
  M12 connector IEC 61076-2-101
• Insulation resistance
  ≥ 5 GΩ*km (Data cable)
• Test voltage
  2500 V
• Thread type
  M16 x 1.5
• Number of bending cycles
  5000000
Material conductor insulation
Foamed PE (Data cable)
Degree of protection
IP67
Material, knurls
Nickel-plated brass
Contact surface material
Ni/Au
Overall twist
2 pairs around a drain wire in the center to the core
External cable diameter D
6.7 mm ±0.3 mm
Traversing rate
3 m/s
Cable capacity
nom. 40 nF/km (Data cable)
Other resistance
Low adhesion
ECLASS 4.1
27140800
ECLASS 9.0
27440102
UNSPSC 12.01
31251501
Coding
A - standard
Mounting type
Front mounting M16 x 1.5 With locking nut
Conductor cross section
2x 0.25 mm² (Data cable)
Core diameter including insulation
1.95 mm ±0.05 mm (Data cable)
Traversing path
4.5 m
ECLASS 7.0
27440103
Length of cable
1 m
Rated voltage
48 V AC
Signal type/category
CANopen®
Degree of pollution
3
Flammability rating according to UL 94
V0
Sealing material
NBR
Cable type
CANopen®/DeviceNet™, PUR, violet
Minimum bending radius, flexible installation
10 x D
Minimum bending radius, drag chain applications
10 x D
Outer sheath, material
PUR
Test voltage Core/Core
2000 V (50 Hz, 1 min.)
Attenuation
≤ 22.9 dB/km (with 1 MHz)
ECLASS 10.0.1
27440102
ETIM 2.0
EC001297
UNSPSC 7.0901
31251501
UNSPSC 20.0
39121413
Conductor structure, voltage supply
19x 0.15 mm
Twisted pairs
2 cores to the pair
ECLASS 5.0
27143400
UNSPSC 18.0
39121413
ECLASS 6.0
27279200
UNSPSC 6.01
31251501
Rated current at 40°C
4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
Number of positions
5
Connection method
CAN Bus / DeviceNet
Torque
3 Nm ... 4 Nm (Installation-side)
Contact material
CuZn
AWG power supply
22
UL AWM style
21198 (80°C/300 V)
Wire colors
Red-black, blue-white
Conductor material
Tin-plated Cu litz wires
Cable weight
90 kg/km
Flame resistance
UL 1581, Sec. 1060 (FT-1)
Halogen-free
in accordance with DIN VDE 0472 part 815
REACh SVHC
Lead 7439-92-1
Bending radius
70 mm
Loop resistance
≤ 181.80 Ω/km (Data cable)
Test voltage Core/Shield
2000 V (50 Hz, 1 min.)
Shielded
yes
ECLASS 11.0
27440102
ECLASS 5.1
27143400
ETIM 4.0
EC000830
UNSPSC 11
31251501
UNSPSC 19.0
39121413
ECLASS 4.0
27140800
ETIM 3.0
EC002061
UNSPSC 21.0
39121413
UNSPSC 13.2
39121413
China RoHS
Environmentally Friendly Use Period = 50 years
Rated surge voltage
1.5 kV
Optical shield covering
80 %
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Shielding
Tinned copper braided shield
Nominal voltage, cable
≤ 300 V (Peak value, not for high-power applications)
ETIM 6.0
EC002061
Minimum bending radius, fixed installation
5 x D
Wave impedance
120 Ω ±10 % (with 1 MHz)