1525652 Phoenix Contact Data & Networking Devices

Product Details

• Ambient temperature (operation)
  -40 °C ... 80 °C (cable, fixed installation)
• Rated voltage
  48 V AC
• Length of cable
  5 m
• Insulation resistance
  ≥ 5 GΩ*km (Data cable)
• Standards/regulations
  M12 connector IEC 61076-2-101
• Torque
  3 Nm ... 4 Nm (Installation-side)
• Signal type/category
  CANopen®
• Connection method
  CAN Bus / DeviceNet
• Contact material
  CuZn
• Thread type
  M16 x 1.5
• Material, knurls
  Nickel-plated brass
• Conductor structure signal line
  19x 0.13 mm
• Type of pair shielding
  Plastic-coated aluminum foil, aluminum side outside
• External cable diameter D
  6.7 mm ±0.3 mm
• Degree of protection
  IP67
• Number of positions
  5
• Safety note
  WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• Flame resistance
  UL 1581, Sec. 1060 (FT-1)
• Test voltage Core/Core
  2000 V (50 Hz, 1 min.)
• Bending radius
  70 mm
Rated surge voltage
1.5 kV
Rated current at 40°C
4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
Overvoltage category
II
Contact carrier material
PA 6.6
Conductor cross section
2x 0.25 mm² (Data cable)
AWG signal line
24
External sheath, color
violet RAL 4001
Acceleration
3 m/s²
Cable weight
90 kg/km
Shielded
yes
ECLASS 4.0
27140800
ECLASS 6.0
27279200
UNSPSC 7.0901
31251501
UNSPSC 13.2
39121413
UNSPSC 20.0
39121413
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Coding
A - standard
Cable type
CANopen®/DeviceNet™, PUR, violet
Cable structure
2xAWG24/19+2xAWG22/19
Wire colors
Red-black, blue-white
Optical shield covering
80 %
Minimum bending radius, drag chain applications
10 x D
Material conductor insulation
Foamed PE (Data cable)
Cable capacity
nom. 40 nF/km (Data cable)
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27143400
ECLASS 4.1
27140800
UNSPSC 6.01
31251501
Degree of pollution
3
Mounting type
Front mounting M16 x 1.5 With locking nut
Flammability rating according to UL 94
V0
Sealing material
NBR
Conductor structure, voltage supply
19x 0.15 mm
Overall twist
2 pairs around a drain wire in the center to the core
Minimum bending radius, fixed installation
5 x D
Minimum bending radius, flexible installation
10 x D
Traversing path
4.5 m
Loop resistance
≤ 181.80 Ω/km (Data cable)
Nominal voltage, cable
≤ 300 V (Peak value, not for high-power applications)
Halogen-free
in accordance with DIN VDE 0472 part 815
ECLASS 5.1
27143400
ETIM 3.0
EC002061
ETIM 6.0
EC002061
UNSPSC 12.01
31251501
UNSPSC 19.0
39121413
Twisted pairs
2 cores to the pair
Traversing rate
3 m/s
Test voltage
2500 V
Contact surface material
Ni/Au
Standards/specifications
M12 connector IEC 61076-2-101
Cable type (abbreviation)
920
AWG power supply
22
Core diameter including insulation
1.95 mm ±0.05 mm (Data cable)
Shielding
Tinned copper braided shield
Number of bending cycles
5000000
Outer sheath, material
PUR
Attenuation
≤ 22.9 dB/km (with 1 MHz)
Other resistance
Low adhesion
Ambient temperature (storage/transport)
-40 °C ... 80 °C
ECLASS 10.0.1
27440102
ECLASS 7.0
27440103
ETIM 4.0
EC000830
UNSPSC 21.0
39121413
Status display
No
Insertion/withdrawal cycles
> 100
UL AWM style
21198 (80°C/300 V)
Conductor material
Tin-plated Cu litz wires
Wave impedance
120 Ω ±10 % (with 1 MHz)
Test voltage Core/Shield
2000 V (50 Hz, 1 min.)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27440102
ETIM 2.0
EC001297
ECLASS 9.0
27440102
UNSPSC 11
31251501
UNSPSC 18.0
39121413