1525623 Phoenix Contact Data & Networking Devices

Product Details

• Status display
  No
• Insertion/withdrawal cycles
  > 100
• Thread type
  M16 x 1.5
• Cable type
  CANopen®/DeviceNet™, PUR, violet
• Conductor structure signal line
  19x 0.13 mm
• Overall twist
  2 pairs around a drain wire in the center to the core
• ETIM 4.0
  EC000830
• UNSPSC 13.2
  39121413
• UNSPSC 21.0
  39121413
• Coding
  A - standard
• Connection method
  CAN Bus / DeviceNet
• Flammability rating according to UL 94
  V0
• Material, knurls
  Nickel-plated brass
• Contact carrier material
  PA 6.6
• AWG signal line
  24
• Wire colors
  Red-black, blue-white
• External sheath, color
  violet RAL 4001
• External cable diameter D
  6.7 mm ±0.3 mm
• ETIM 3.0
  EC002061
• UNSPSC 12.01
  31251501
UNSPSC 20.0
39121413
Rated surge voltage
1.5 kV
Mounting type
Front mounting M16 x 1.5 With locking nut
Sealing material
NBR
Conductor cross section
2x 0.25 mm² (Data cable)
AWG power supply
22
Shielding
Tinned copper braided shield
ECLASS 5.1
27143400
UNSPSC 7.0901
31251501
UNSPSC 19.0
39121413
Signal type/category
CANopen®
Contact material
CuZn
Cable type (abbreviation)
920
UL AWM style
21198 (80°C/300 V)
Twisted pairs
2 cores to the pair
Core diameter including insulation
1.95 mm ±0.05 mm (Data cable)
Bending radius
70 mm
ECLASS 7.0
27440103
ETIM 2.0
EC001297
UNSPSC 6.01
31251501
UNSPSC 18.0
39121413
Test voltage
2500 V
Overvoltage category
II
Contact surface material
Ni/Au
Standards/specifications
M12 connector IEC 61076-2-101
Cable structure
2xAWG24/19+2xAWG22/19
Optical shield covering
80 %
Traversing path
4.5 m
Outer sheath, material
PUR
Ambient temperature (storage/transport)
-40 °C ... 80 °C
ECLASS 4.0
27140800
ECLASS 9.0
27440102
ETIM 6.0
EC002061
UNSPSC 11
31251501
Cable weight
90 kg/km
Wave impedance
120 Ω ±10 % (with 1 MHz)
Ambient temperature (operation)
-40 °C ... 80 °C (cable, fixed installation)
Rated voltage
48 V AC
Standards/regulations
M12 connector IEC 61076-2-101
Degree of protection
IP67
Torque
3 Nm ... 4 Nm (Installation-side)
Minimum bending radius, fixed installation
5 x D
Attenuation
≤ 22.9 dB/km (with 1 MHz)
Rated current at 40°C
4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
Length of cable
0.5 m
Number of positions
5
Degree of pollution
3
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Insulation resistance
≥ 5 GΩ*km (Data cable)
Material conductor insulation
Foamed PE (Data cable)
Nominal voltage, cable
≤ 300 V (Peak value, not for high-power applications)
Other resistance
Low adhesion
Shielded
yes
ECLASS 11.0
27440102
Minimum bending radius, drag chain applications
10 x D
Acceleration
3 m/s²
China RoHS
Environmentally Friendly Use Period = 50 years
Type of pair shielding
Plastic-coated aluminum foil, aluminum side outside
Number of bending cycles
5000000
Cable capacity
nom. 40 nF/km (Data cable)
Test voltage Core/Shield
2000 V (50 Hz, 1 min.)
ECLASS 10.0.1
27440102
ECLASS 6.0
27279200
Minimum bending radius, flexible installation
10 x D
Conductor material
Tin-plated Cu litz wires
Test voltage Core/Core
2000 V (50 Hz, 1 min.)
Flame resistance
UL 1581, Sec. 1060 (FT-1)
ECLASS 5.0
27143400
ECLASS 4.1
27140800
Conductor structure, voltage supply
19x 0.15 mm
Traversing rate
3 m/s
Loop resistance
≤ 181.80 Ω/km (Data cable)
Halogen-free
in accordance with DIN VDE 0472 part 815
REACh SVHC
Lead 7439-92-1