1508365 Phoenix Contact Data & Networking Devices

Product Details

• Status display
  No
• Connection method
  Screw connection
• Contact carrier material
  PA 6.6
• Contact surface material
  Au
• Connection in acc. with standard
  CUL
• ECLASS 5.0
  27260700
• ETIM 2.0
  EC001121
• Coding
  A - standard
• Conductor cross section AWG
  24 ... 18 (without ferrule)
• Contact material
  CuZn
• Material, knurls
  Zinc die-cast, nickel-plated
• REACh SVHC
  Lead 7439-92-1
• ECLASS 11.0
  27440102
• ECLASS 4.0
  27260700
• ECLASS 7.0
  27440104
• Degree of protection
  IP67
• Number of positions
  5
• Rated current at 40°C
  4 A
• Conductor cross section
  0.25 mm² ... 0.75 mm² (without ferrule)
• Flammability rating according to UL 94
  HB
Material of grip body
Zinc die-cast, nickel-plated
ECLASS 10.0.1
27440102
ECLASS 5.1
27260700
ECLASS 9.0
27440102
ETIM 4.0
EC002062
Sealing material
NBR
Overvoltage category
II
Degree of pollution
3
Tightening torque
Screw plug insert with sleeve housing as far it will go
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27260700
ECLASS 6.0
27279200
ETIM 3.0
EC002062
UNSPSC 21.0
39121413
External diameter
6.5 mm ... 8.5 mm
Assembly instructions
The wires can be connected both with ferrules and without ferrules
UNSPSC 13.2
39121413
Stripping length of the individual wire
5 mm
Rated voltage
48 V AC
UNSPSC 7.0901
31251501
Ambient temperature (operation)
-40 °C ... 85 °C (Plug / socket)
Signal type/category
CAN Bus/DeviceNet
Torque
0.4 Nm (M12 knurl)
Standards/specifications
M12 connector IEC 61076-2-101
Length
56 mm
Insulation resistance
≥ 100 MΩ
Stripping length of the sheath
33 mm (for outside cable diameter < 5.5 mm, strip 21 mm off and fold the cable shield back over the cable sheath)
Standards/regulations
M12 connector IEC 61076-2-101
Insertion/withdrawal cycles
≥ 100
UNSPSC 6.01
31251501
UNSPSC 19.0
39121413
ETIM 6.0
EC002062
UNSPSC 20.0
39121413
UNSPSC 12.01
31251501
Note
NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
UNSPSC 18.0
39121413
UNSPSC 11
31251501