1507764 Phoenix Contact Data & Networking Devices

Product Details

• Diameter housing
  20 mm
• Degree of protection
  IP67
• UNSPSC 11
  31251501
• Insulation resistance
  ≥ 100 MΩ
• Connection method
  Screw connection
• REACh SVHC
  Lead 7439-92-1
• ETIM 4.0
  EC002062
• UNSPSC 18.0
  39121413
• Stripping length of the sheath
  33 mm (for outside cable diameter < 5.5 mm, strip 21 mm off and fold the cable shield back over the cable sheath)
• UNSPSC 21.0
  39121413
• External cable diameter
  6.5 mm ... 8.5 mm
• Number of positions
  5
• UNSPSC 13.2
  39121413
• UNSPSC 19.0
  39121413
• Stripping length of the individual wire
  5 mm
• Coding
  B - inverse
• Rated current at 40°C
  4 A
• UNSPSC 20.0
  39121413
• Length
  62 mm
• UNSPSC 12.01
  31251501
Rated voltage
48 V AC
Signal type/category
PROFIBUS
Contact material
CuZn
Assembly instructions
The wires can be connected both with ferrules and without ferrules
Flammability rating according to UL 94
HB
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27279200
ECLASS 9.0
27440102
Ambient temperature (operation)
-40 °C ... 85 °C (Plug / socket)
Standards/regulations
M12 connector IEC 61076-2-101
Conductor cross section AWG
24 ... 18 (without ferrule)
Torque
0.4 Nm (M12 knurl)
Contact carrier material
PA 6.6
ECLASS 10.0.1
27440102
Connection in acc. with standard
CUL
ECLASS 4.0
27260700
ECLASS 7.0
27440104
UNSPSC 6.01
31251501
Note
NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
Status display
No
Conductor cross section
0.25 mm² ... 0.75 mm² (without ferrule)
Tightening torque
Screw plug insert with sleeve housing as far it will go
Contact surface material
Au
Material, knurls
Zinc die-cast, nickel-plated
Sealing material
NBR
ECLASS 5.1
27260700
ECLASS 4.1
27260700
ETIM 3.0
EC002062
UNSPSC 7.0901
31251501
Overvoltage category
II
Degree of pollution
3
Insertion/withdrawal cycles
≥ 100
Material of grip body
Zinc die-cast, nickel-plated
Standards/specifications
M12 connector IEC 61076-2-101
ECLASS 11.0
27440102
ECLASS 5.0
27260700
ETIM 2.0
EC001121
ETIM 6.0
EC002062