1437782 Phoenix Contact Electrical Connectors

1437782 on Power Resources International
Phoenix Contact

Part#:1437782

Manufacturer:Phoenix Contact

Category:Electrical Connectors

Product Lifecycle:Active

Product description

Bus system flush-type socket, PROFINET, 4-pos., M12, shielded, D-coded, SPEEDCON, rear/screw mounting with Pg9 thread, with 2.0 m bus cable, 2 x 2 x 0.34 mm²

Product Details

  • Length of cable
    2 m
  • Rated current at 40°C
    4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
  • Signal type/category
    PROFINET CAT5 (IEC 11801), 100 Mbps
  • Flammability rating according to UL 94
    V0
  • Contact surface material
    Ni/Au
  • UL AWM style
    21694
  • Conductor structure signal line
    7x 0.25 mm
  • Shielding
    Aluminum-coated foil, tinned copper braided shield
  • Minimum bending radius, fixed installation
    3 x D
  • Material conductor insulation
    PE
  • ETIM 3.0
    EC002061
  • UNSPSC 13.2
    39121413
  • Note
    The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
  • Coding
    D - data
  • Overvoltage category
    II
  • Transmission characteristics (category)
    CAT5
  • Standards/specifications
    M12 connector IEC 61076-2-101
  • AWG signal line
    22
  • Optical shield covering
    85 %
  • Minimum bending radius, flexible installation
    7 x D
  • Loop resistance
    ≤ 120.00 Ω/km
  • Wave impedance
    100 Ω ±15 Ω (at 100 MHz)
  • Nominal voltage, cable
    600 V
  • ECLASS 9.0
    27440102
  • ECLASS 7.0
    27440103
  • UNSPSC 12.01
    31251501
  • UNSPSC 21.0
    39121413
  • Degree of protection
    IP67 (When plugged in)
  • Standards/regulations
    M12 connector IEC 61076-2-101
  • Insertion/withdrawal cycles
    ≥ 100
  • Material, knurls
    Nickel-plated brass
  • Wire colors
    White, yellow, blue, orange
  • External cable diameter D
    6.5 mm ±0.2 mm
  • Outer sheath thickness
    approx. 0.9 mm
  • Insulation resistance
    ≥ 500 MΩ*km
  • Signal speed
    0.66 c
  • Test voltage Core/Core
    2000 V (50 Hz, 1 min.)
  • Ambient temperature (installation)
    -20 °C ... 60 °C
  • Shielded
    yes
  • ECLASS 5.1
    27143400
  • UNSPSC 6.01
    31251501
  • UNSPSC 7.0901
    31251501
  • UNSPSC 19.0
    39121413
  • Ambient temperature (operation)
    -40 °C ... 70 °C (cable, fixed installation)
  • Number of positions
    4
  • Degree of pollution
    3
  • Contact material
    CuZn
  • Sealing material
    FKM
  • Cable type (abbreviation)
    93B
  • Core diameter including insulation
    1.55 mm
  • External sheath, color
    green RAL 6018
  • Outer sheath, material
    PVC
  • Material, inner sheath
    PVC
  • ETIM 4.0
    EC000830
  • UNSPSC 11
    31251501
  • UNSPSC 18.0
    39121413
  • Rated voltage
    250 V AC
  • Rated surge voltage
    2.5 kV
  • Torque
    2 Nm ... 3 Nm (Installation-side)
  • Contact carrier material
    PA 6.6
  • Cable type
    PROFINET PVC stranded CAT5
  • Cable structure
    1x4xAWG22/7; SF/TQ
  • Conductor cross section
    4x 0.34 mm²
  • Overall twist
    Star quad
  • Cable weight
    67 kg/km
  • Conductor material
    Tin-plated Cu litz wires
  • Near end crosstalk attenuation (NEXT)
    80 dB (with 1 MHz)
  • Test voltage Core/Shield
    2000 V (50 Hz, 1 min.)
  • ECLASS 6.0
    27279200
  • ETIM 6.0
    EC002061
  • UNSPSC 20.0
    39121413
  • Signal runtime
    5.3 ns/m
  • Resistance to oil
    Resistant to oil to a limited extent
  • ECLASS 4.0
    27140800
  • ECLASS 4.1
    27140800
  • Coupling resistance
    ≤ 20.00 mΩ/m (at 10 MHz)
  • Other resistance
    UV resistant According to UL 1581, Section 1200
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 5.0
    27143400
  • Attenuation
    2.1 dB (with 1 MHz)
  • Flame resistance
    according to UL 1685 (CSA FT 4)
  • ECLASS 11.0
    27440102
  • Safety note
    WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
  • Ambient temperature (storage/transport)
    -50 °C ... 70 °C
  • ECLASS 10.0.1
    27440102
  • China RoHS
    Environmentally Friendly Use Period = 50 years

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.


Manufacturer warranty

1437782 Phoenix Contact

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Warranty


Responsive Customer Support


Need more details?

Feel free to chat with us

About the manufacturer

Phoenix Contact

Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.

About the Product Category

Electrical connectors, which are crucial components for connecting circuit subsections, enable easy disconnection when required. They are typically used for power inputs, peripheral connections, and interchangeable boards.

Electrical Connectors

Relevant products

FAQ

Out if stock but available for backorder.

Bus system flush-type socket, PROFINET, 4-pos., M12, shielded, D-coded, SPEEDCON, rear/screw mounting with Pg9 thread, with 2.0 m bus cable, 2 x 2 x 0.34 mm²

What can I help you find today?

Recommended parts