1437591 Phoenix Contact Data & Networking Devices

Product Details

• Ambient temperature (operation)
  -40 °C ... 80 °C (cable, fixed installation)
• Rated current at 40°C
  4 A
• Standards/regulations
  M12 connector IEC 61076-2-101
• Insertion/withdrawal cycles
  > 100
• Torque
  2 Nm ... 3 Nm (Installation-side)
• Length of cable
  5 m
• Number of positions
  5
• Degree of pollution
  3
• Overvoltage category
  II
• Sealing material
  FKM
• Cable type
  CANopen®/DeviceNet™, PUR, violet
• Rated surge voltage
  1.5 kV
• Coding
  A - standard
• Contact material
  CuZn
• Degree of protection
  IP67 (When plugged in)
• Rated voltage
  48 V AC
• Signal type/category
  CANopen®
• Bending radius
  70 mm
• Note
  The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
• Cable structure
  2xAWG24/19+2xAWG22/19
UL AWM style
21198 (80°C/300 V)
Overall twist
2 pairs around a drain wire in the center to the core
External cable diameter D
6.7 mm ±0.3 mm
Material conductor insulation
Foamed PE (Data cable)
Attenuation
≤ 22.9 dB/km (with 1 MHz)
Insulation resistance
≥ 5 GΩ*km (Data cable)
Contact carrier material
PA 6.6
Cable type (abbreviation)
920
AWG power supply
22
Wire colors
Red-black, blue-white
Shielding
Tinned copper braided shield
Minimum bending radius, drag chain applications
10 x D
Traversing rate
3 m/s
Cable weight
90 kg/km
Cable capacity
nom. 40 nF/km (Data cable)
Flame resistance
UL 1581, Sec. 1060 (FT-1)
Contact surface material
Ni/Au
Standards/specifications
M12 connector IEC 61076-2-101
Core diameter including insulation
1.95 mm ±0.05 mm (Data cable)
Type of pair shielding
Plastic-coated aluminum foil, aluminum side outside
Number of bending cycles
5000000
Traversing path
4.5 m
Outer sheath, material
PUR
Wave impedance
120 Ω ±10 % (with 1 MHz)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
ECLASS 5.1
27143400
ECLASS 11.0
27440102
UNSPSC 11
31251501
Material, knurls
Zinc die-cast, nickel-plated
Conductor structure signal line
19x 0.13 mm
AWG signal line
24
Minimum bending radius, flexible installation
10 x D
External sheath, color
violet RAL 4001
Acceleration
3 m/s²
Conductor material
Tin-plated Cu litz wires
Test voltage Core/Shield
2000 V (50 Hz, 1 min.)
Other resistance
Low adhesion
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27140800
ECLASS 9.0
27440102
UNSPSC 7.0901
31251501
Connection method
CAN Bus / DeviceNet
Flammability rating according to UL 94
V0
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Conductor cross section
2x 0.25 mm² (Data cable)
Twisted pairs
2 cores to the pair
Conductor structure, voltage supply
19x 0.15 mm
Optical shield covering
80 %
Minimum bending radius, fixed installation
5 x D
Loop resistance
≤ 181.80 Ω/km (Data cable)
Nominal voltage, cable
≤ 300 V (Peak value, not for high-power applications)
Halogen-free
in accordance with DIN VDE 0472 part 815
ECLASS 10.0.1
27440102
ECLASS 4.0
27140800
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27143400
ECLASS 7.0
27440103
ETIM 3.0
EC002061
UNSPSC 20.0
39121413
UNSPSC 19.0
39121413
Shielded
yes
ECLASS 6.0
27279200
ETIM 6.0
EC002061
UNSPSC 12.01
31251501
UNSPSC 21.0
39121413
UNSPSC 13.2
39121413
UNSPSC 6.01
31251501
UNSPSC 18.0
39121413
ETIM 4.0
EC002061
Test voltage Core/Core
2000 V (50 Hz, 1 min.)