1437562 Phoenix Contact Data & Networking Devices

Product Details

• AWG power supply
  22
• Minimum bending radius, fixed installation
  5 x D
• Test voltage Core/Core
  2000 V (50 Hz, 1 min.)
• REACh SVHC
  Lead 7439-92-1
• Coding
  A - standard
• Torque
  2 Nm ... 3 Nm (Installation-side)
• UL AWM style
  21198 (80°C/300 V)
• Overall twist
  2 pairs around a drain wire in the center to the core
• Cable type (abbreviation)
  920
• Optical shield covering
  80 %
• Bending radius
  70 mm
• Acceleration
  3 m/s²
• Attenuation
  ≤ 22.9 dB/km (with 1 MHz)
• Test voltage Core/Shield
  2000 V (50 Hz, 1 min.)
• Ambient temperature (storage/transport)
  -40 °C ... 80 °C
• ECLASS 6.0
  27279200
• Rated surge voltage
  1.5 kV
• Signal type/category
  CANopen®
• Insertion/withdrawal cycles
  > 100
• AWG signal line
  24
Core diameter including insulation
1.95 mm ±0.05 mm (Data cable)
UNSPSC 12.01
31251501
UNSPSC 6.01
31251501
UNSPSC 19.0
39121413
Wire colors
Red-black, blue-white
External sheath, color
violet RAL 4001
Minimum bending radius, drag chain applications
10 x D
Wave impedance
120 Ω ±10 % (with 1 MHz)
Flame resistance
UL 1581, Sec. 1060 (FT-1)
Shielded
yes
ECLASS 4.0
27140800
UNSPSC 20.0
39121413
UNSPSC 13.2
39121413
Number of positions
5
Overvoltage category
II
Contact carrier material
PA 6.6
Flammability rating according to UL 94
V0
Conductor structure signal line
19x 0.13 mm
Material conductor insulation
Foamed PE (Data cable)
ETIM 3.0
EC002061
Minimum bending radius, flexible installation
10 x D
ECLASS 10.0.1
27440102
ETIM 6.0
EC002061
ECLASS 9.0
27440102
UNSPSC 21.0
39121413
Degree of pollution
3
Contact material
CuZn
Standards/specifications
M12 connector IEC 61076-2-101
Cable structure
2xAWG24/19+2xAWG22/19
Type of pair shielding
Plastic-coated aluminum foil, aluminum side outside
Traversing path
4.5 m
Cable capacity
nom. 40 nF/km (Data cable)
Halogen-free
in accordance with DIN VDE 0472 part 815
Connection method
CAN Bus / DeviceNet
Sealing material
FKM
Shielding
Tinned copper braided shield
External cable diameter D
6.7 mm ±0.3 mm
Number of bending cycles
5000000
Conductor material
Tin-plated Cu litz wires
Nominal voltage, cable
≤ 300 V (Peak value, not for high-power applications)
Other resistance
Low adhesion
ECLASS 4.1
27140800
ECLASS 5.0
27143400
ETIM 4.0
EC002061
UNSPSC 11
31251501
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Conductor structure, voltage supply
19x 0.15 mm
Standards/regulations
M12 connector IEC 61076-2-101
Material, knurls
Zinc die-cast, nickel-plated
ECLASS 5.1
27143400
Length of cable
0.5 m
Rated voltage
48 V AC
Cable weight
90 kg/km
Rated current at 40°C
4 A
Insulation resistance
≥ 5 GΩ*km (Data cable)
Conductor cross section
2x 0.25 mm² (Data cable)
Twisted pairs
2 cores to the pair
Traversing rate
3 m/s
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
ECLASS 11.0
27440102
Degree of protection
IP67 (When plugged in)
Ambient temperature (operation)
-40 °C ... 80 °C (cable, fixed installation)
Contact surface material
Ni/Au
Outer sheath, material
PUR
Loop resistance
≤ 181.80 Ω/km (Data cable)
UNSPSC 7.0901
31251501
UNSPSC 18.0
39121413
ECLASS 7.0
27440103
China RoHS
Environmentally Friendly Use Period = 50 years
Cable type
CANopen®/DeviceNet™, PUR, violet