1437135 Phoenix Contact Electrical Wires & Cables

Product Details

• Note
  The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
• Coding
  A - standard
• Degree of pollution
  3
• Contact material
  CuZn
• Cable type
  TPE litz wire
• Material conductor insulation
  TPE
• Conductor resistance
  ≤ 57.6 mΩ/m
• ECLASS 11.0
  27440102
• ECLASS 5.0
  27143400
• ECLASS 9.0
  27440102
• UNSPSC 6.01
  31251501
• UNSPSC 13.2
  39121413
• UNSPSC 18.0
  39121413
• Degree of protection
  IP67 (When plugged in)
• Rated current at 40°C
  1.5 A
• Overvoltage category
  II
• Flammability rating according to UL 94
  V0
• Contact carrier material
  PA 6.6
• Core diameter including insulation
  1.1 mm ±0.05 mm
• Nominal voltage, cable
  300 V
ECLASS 10.0.1
27440102
ECLASS 5.1
27143400
ETIM 4.0
EC002061
UNSPSC 7.0901
31251501
UNSPSC 19.0
39121413
Ambient temperature (operation)
-40 °C ... 85 °C (cable, fixed installation)
Rated surge voltage
0.8 kV
Insulation resistance
≥ 20 MΩ*km
Torque
1.5 Nm ... 2 Nm (Installation-side)
Contact surface material
Au
AWG signal line
26
Wire colors
brown, blue, white, green, pink, yellow, black, gray, red, violet, gray/pink, red/blue, white/green, brown/green, white/yellow, yellow/brown, white/gray
Test voltage, cable
2000 V AC
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 3.0
EC002061
UNSPSC 11
31251501
UNSPSC 21.0
39121413
Rated voltage
30 V
Standards/regulations
M12 connector IEC 61076-2-101
Connection method
Individual wires
Mounting type
Rear mounting M12 x 1 With flat nut
Sealing material
NBR
Conductor cross section
0.14 mm²
Standards/specifications
M12 connector IEC 61076-2-101
ECLASS 4.0
27140800
ECLASS 4.1
27140800
ETIM 6.0
EC002061
UNSPSC 20.0
39121413
Length of cable
0.5 m
Number of positions
17
Status display
No
Insertion/withdrawal cycles
> 100
Thread type
M12 x 1
Material, knurls
Zinc die-cast, nickel-plated
Thickness, insulation
0.21 mm (Core insulation)
Conductor structure signal line
7x 0.16 mm
REACh SVHC
Lead 7439-92-1
ECLASS 7.0
27440103
ECLASS 6.0
27279200
UNSPSC 12.01
31251501