1429156 Phoenix Contact Data & Networking Devices

Product Details

• Stripping length of the sheath
  ≥ 35 mm
• Rated current at 40°C
  2 A
• Coding
  A - standard
• Degree of pollution
  3
• Wire diameter including insulation
  1 mm ... 1.6 mm
• Contact material
  CuSn
• Material, knurls
  Nickel-plated brass
• ECLASS 5.0
  27143400
• ECLASS 9.0
  27440102
• UNSPSC 12.01
  31251501
• Degree of protection
  IP67
• Standards/regulations
  M12 connector according to IEC 61076-2-101
• Conductor cross section
  0.14 mm² ... 0.34 mm²
• Frequency of connections between conductors of the same cross section
  ≥ 10
• Standards/specifications
  M12 connector according to IEC 61076-2-101
• Sealing material
  Neoprene
• ECLASS 7.0
  27440104
• UNSPSC 6.01
  31251501
• UNSPSC 11
  31251501
• UNSPSC 20.0
  39121413
External cable diameter
4 mm ... 8 mm
Number of positions
6
Overvoltage category
II
Torque
0.4 Nm (M12 knurl)
Material of grip body
Zinc die-cast, nickel-plated
ECLASS 10.0.1
27440102
ECLASS 4.0
27140800
ECLASS 6.0
27279200
ETIM 6.0
EC002062
UNSPSC 18.0
39121413
Note
NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
Insulation resistance
≥ 100 MΩ
Status display
No
Conductor cross section AWG
26 ... 22
Flammability rating according to UL 94
V0
Contact carrier material
PA6
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27140800
ETIM 4.0
EC002062
UNSPSC 13.2
39121413
UNSPSC 21.0
39121413
Ambient temperature (operation)
-40 °C ... 85 °C
Rated voltage
30 V AC
Signal type/category
VARAN
Connection method
Insulation displacement connection
Assembly instructions
The connector pin assignment can be rotated 45° to the cable outlet
Insertion/withdrawal cycles
≥ 100
Contact surface material
Ni/Au
ECLASS 11.0
27440102
ECLASS 5.1
27143400
ETIM 3.0
EC002062
UNSPSC 7.0901
31251501
UNSPSC 19.0
39121413