1429143 Phoenix Contact Data & Networking Devices

Product Details

• Signal type/category
  VARAN
• Connection method
  Insulation displacement connection
• Contact material
  CuSn
• Material, knurls
  Nickel-plated brass
• UNSPSC 13.2
  39121413
• Stripping length of the sheath
  ≥ 35 mm
• Note
  NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
• REACh SVHC
  Lead 7439-92-1
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ETIM 4.0
  EC002062
• Coding
  A - standard
• Contact carrier material
  PA6
• ECLASS 11.0
  27440102
• ECLASS 7.0
  27440104
• UNSPSC 21.0
  39121413
• Degree of protection
  IP67
• Degree of pollution
  3
• Conductor cross section
  0.14 mm² ... 0.34 mm²
• ETIM 3.0
  EC002062
• ECLASS 9.0
  27440102
Standards/regulations
M12 connector according to IEC 61076-2-101
Frequency of connections between conductors of the same cross section
≥ 10
Insertion/withdrawal cycles
≥ 100
UNSPSC 6.01
31251501
UNSPSC 12.01
31251501
UNSPSC 20.0
39121413
Rated current at 40°C
2 A
Status display
No
Sealing material
Neoprene
ECLASS 4.0
27140800
ECLASS 5.0
27143400
Number of positions
6
Overvoltage category
II
Conductor cross section AWG
26 ... 22
Ambient temperature (operation)
-40 °C ... 85 °C
Flammability rating according to UL 94
V0
Material of grip body
Zinc die-cast, nickel-plated
ECLASS 10.0.1
27440102
ECLASS 5.1
27143400
Insulation resistance
≥ 100 MΩ
Wire diameter including insulation
1 mm ... 1.6 mm
Torque
0.4 Nm (M12 knurl)
UNSPSC 18.0
39121413
External cable diameter
4 mm ... 8 mm
Rated voltage
30 V AC
Contact surface material
Ni/Au
Standards/specifications
M12 connector according to IEC 61076-2-101
ECLASS 4.1
27140800
ECLASS 6.0
27279200
UNSPSC 19.0
39121413
UNSPSC 7.0901
31251501
UNSPSC 11
31251501
ETIM 6.0
EC002062