1425637 Phoenix Contact Electrical Wires & Cables

Product Details

• Note
  The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
• Coding
  K - Power
• Status display
  No
• Connection method
  Individual wires
• Insertion/withdrawal cycles
  > 100
• Thread type
  M16 x 1.5
• Sealing material
  FKM
• Material conductor insulation
  mPPE
• AWG signal line
  16
• ECLASS 10.0.1
  27440102
• Rated current at 40°C
  12 A
• Standards/regulations
  M12 connector IEC 61076-2-111 In line with
• Torque
  0.8 Nm ... 1.3 Nm (Installation-side)
• Halogen-free
  yes
• Contact material
  CuZn
• Core diameter including insulation
  2.2 mm
• REACh SVHC
  Lead 7439-92-1
• Conductor material
  Bare Cu litz wires
• ECLASS 9.0
  27440102
• Ambient temperature (operation)
  -40 °C ... 105 °C (cable, fixed installation)
Rated surge voltage
6 kV
Overvoltage category
III
Test voltage
6 kV
Assembly instructions
Tightening limitation
Contact carrier material
PA
Additional material specifications
PU 2K (Grout material)
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27143423
Length of cable
0.2 m
Rated voltage
630 V
Degree of pollution
3
Flame resistance
in acc. to UL 1581 VW1
Material, knurls
Zinc die-cast, nickel-plated
Conductor cross section
1.31 mm²
Wire colors
Black 1, black 2, black 3, black 4, green/yellow
ECLASS 5.1
27143423
Degree of protection
IP67
Signal type/category
Power
Number of positions
5
Mounting type
Rear mounting M16 x 1.5 With flat nut
Flammability rating according to UL 94
V0
Contact surface material
Au
Cable type
UL/cUL stranded hook-up wire
Standards/specifications
M12 connector IEC 61076-2-111 In line with
ECLASS 11.0
27440102