1424700 Phoenix Contact Electrical Connectors

Product Details

• Diameter housing
  19 mm
• Stripping length of the individual wire
  7 mm
• Note
  NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
• Status display
  No
• Conductor cross section
  0.14 mm² ... 0.75 mm² (without ferrule)
• Flammability rating according to UL 94
  V0
• Material of grip body
  Zinc die-cast, nickel-plated
• Additional material specifications
  TPE-U (Clamping cage, weight: 1.1 g)
• ECLASS 11.0
  27440102
• Length
  59 mm
• Stripping length of the sheath
  29 mm
• Rated current at 40°C
  4 A (2 A when using 0.14 mm² conductors)
• Degree of pollution
  3
• Insertion/withdrawal cycles
  ≥ 100
• Contact surface material
  Ni/Au
• ECLASS 10.0.1
  27440102
• ETIM 6.0
  EC002635
• Ambient temperature (operation)
  -40 °C ... 85 °C (Plug / socket)
• Rated voltage
  48 V AC
• Coding
  A - standard
Connection method
Push-in connection
Assembly instructions
The wires can be connected both with ferrules and without ferrules
Contact carrier material
PA 6.6
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 7.0
27440104
ECLASS 9.0
27440102
External cable diameter
4 mm ... 8 mm
Number of positions
4
Signal type/category
CC link, 10 Mbps
Overvoltage category
II
Conductor cross section AWG
26 ... 18 (without ferrule)
Material, knurls
Zinc die-cast, nickel-plated
Standards/specifications
M12 connector IEC 61076-2-101
ECLASS 5.1
27143423
Degree of protection
IP65
Insulation resistance
≥ 100 MΩ
Standards/regulations
acc. to DIN EN 45545-2
Torque
0.4 Nm (M12 knurl)
Contact material
CuSn
Sealing material
NBR
ECLASS 6.0
27279200
ETIM 7.0
EC002635