1424148 Phoenix Contact Data & Networking Devices

Product Details

• Length of cable
  1 m
• Ambient temperature (storage/transport)
  -20 °C ... 80 °C
• ECLASS 4.1
  27140800
• ECLASS 5.0
  27143400
• ETIM 3.0
  EC001855
• UNSPSC 19.0
  26121604
• Degree of protection
  IP65
• Wire colors
  white/blue-blue, white/orange-orange, white/green-green, white/brown-brown
• Shielding
  Tinned copper braided shield
• Tensile strength GRP
  ≤ 100 N
• Cable weight
  42 kg/km
• Power-summated near end crosstalk attenuation (PSNEXT)
  72.3 dB (with 1 MHz)
• Return loss (RL)
  20 dB (with 1 MHz)
• Test voltage Core/Core
  700 V (50 Hz, 1 min.)
• Test voltage Core/Shield
  700 V (50 Hz, 1 min.)
• Cable structure
  4x2xAWG26/7; S/FTP
• Minimum bending radius, fixed installation
  4 x D
• Shield attenuation
  ≥ 80 dB (at 30 ... 100 MHz)
• External sheath, color
  water blue RAL 5021
• China RoHS
  Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27060308
ECLASS 6.0
27143400
ETIM 7.0
EC001262
UNSPSC 18.0
26121604
UNSPSC 21.0
26121604
Degree of pollution
3
Conductor structure signal line
7x 0.16 mm
Ambient temperature (operation)
-40 °C ... 80 °C (cable, fixed installation)
Alternative short product description
Ethernet cable
Insertion/withdrawal cycles
≥ 100
Standards/specifications
M12 connector IEC 61076-2-109
AWG signal line
26
Outer sheath, material
PUR
Insulation resistance
≥ 500 MΩ*km
Near end crosstalk attenuation (NEXT)
75.3 dB (with 1 MHz)
Halogen-free
according to IEC 60754-1
Transmission speed
10 Gbps
UL AWM style
20963 (80°C/30 V)
UNSPSC 20.0
26121604
Rated voltage
50 V AC
Signal type/category
Ethernet CAT6A, 10 Gbps
Overall twist
4 pairs for core
Standards/regulations
M12 connector IEC 61076-2-109
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
External cable diameter D
6.4 mm ±0.2 mm
ECLASS 10.0.1
27060308
ECLASS 7.0
27060308
ETIM 4.0
EC002062
UNSPSC 7.0901
31251501
Core diameter including insulation
1.04 mm
Loop resistance
≤ 290.00 Ω/km
Material conductor insulation
Foamed PE
Wave impedance
100 Ω ±5 Ω (at 100 MHz)
Nominal voltage, cable
≤ 100 V
ECLASS 4.0
27140800
ECLASS 9.0
27060308
UNSPSC 13.2
26121604
Rated current at 40°C
0.5 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
Number of positions
8
Contact material
CuZn
Transmission characteristics (category)
CAT6A
Cable type
Ethernet 10 Gbit
Type of pair shielding
Aluminum-lined foil
Conductor cross section
4x 2x 0.14 mm²
Optical shield covering
70 %
Outer sheath thickness
0.65 mm
Signal runtime
5.13 ns/m
Resistance to oil
in accordance with DIN EN 60811-2-1
Shielded
yes
Minimum bending radius, flexible installation
8 x D
Cable capacity
47 nF/km
Attenuation
3.1 dB (with 1 MHz)
Flame resistance
according to IEC 60332-1-2
ECLASS 5.1
27143400
ETIM 6.0
EC001262
UNSPSC 11
31251501
UNSPSC 12.01
31251501
Contact surface material
Au
Flammability rating according to UL 94
V0
Rated surge voltage
0.8 kV
Overvoltage category
III
Cable type (abbreviation)
94F
Twisted pairs
2 cores to the pair
REACh SVHC
Lead 7439-92-1
Conductor material
Bare Cu litz wires
Contact carrier material
PPA
UNSPSC 6.01
31251501
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Ambient temperature (installation)
-20 °C ... 80 °C