1419603 Phoenix Contact Electrical Connectors

Product Details

• Overvoltage category
  II
• Thread type
  M16 x 1.5
• Ambient temperature (operation)
  -40 °C ... 85 °C (cable, fixed installation)
• Rated surge voltage
  2.5 kV
• Degree of protection
  IP67 (When plugged in)
• Coding
  D - data
• Connection method
  Individual wires
• Insertion/withdrawal cycles
  > 100
• Flammability rating according to UL 94
  V0
• Material, knurls
  Zinc die-cast, nickel-plated
• Material conductor insulation
  TPE
• Conductor material
  Tin-plated Cu litz wires
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 4.0
  27140800
• ECLASS 7.0
  27440103
• UNSPSC 11
  31251501
• UNSPSC 19.0
  39121413
• Rated current at 40°C
  4 A
• Rated voltage
  250 V
• Status display
  No
Contact surface material
Au
Cable type
TPE litz wire
Conductor cross section
0.34 mm²
Conductor resistance
≤ 57.6 mΩ/m
Transmission characteristics (category)
CAT5 (IEC 11801:2002)
ECLASS 10.0.1
27440102
ECLASS 5.1
27143400
ETIM 2.0
EC001297
UNSPSC 12.01
31251501
UNSPSC 20.0
39121413
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Number of positions
4
Standards/regulations
M12 connector IEC 61076-2-101
Torque
3 Nm ... 4 Nm (Installation-side)
Sealing material
FKM
Conductor structure signal line
7x 0.25 mm
Wire colors
Yellow, orange, white, blue
Nominal voltage, cable
300 V
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27279200
ETIM 4.0
EC000830
ETIM 6.0
EC002061
UNSPSC 21.0
39121413
Length of cable
0.5 m
Insulation resistance
≥ 20 MΩ*km
Degree of pollution
3
Mounting type
Rear mounting M16 x 1.5 With flat nut
Contact material
CuZn
Core diameter including insulation
1.2 mm ±0.07 mm
Standards/specifications
M12 connector IEC 61076-2-101
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
ECLASS 11.0
27440102
ECLASS 5.0
27143400
ETIM 3.0
EC002061
UNSPSC 7.0901
31251501
UNSPSC 13.2
39121413
Contact carrier material
PA 6.6
AWG signal line
22
Thickness, insulation
0.21 mm
Test voltage, cable
2000 V AC
ECLASS 4.1
27140800
ECLASS 9.0
27440102
UNSPSC 6.01
31251501
UNSPSC 18.0
39121413