1417443 Phoenix Contact Data & Networking Devices

Product Details

• Standards/regulations
  M12 connector IEC 61076-2-109
• Status display
  No
• Degree of protection
  IP65
• Torque
  0.4 Nm (M12 knurl)
• UNSPSC 12.01
  31251501
• UNSPSC 21.0
  39121413
• External cable diameter
  4 mm ... 8 mm
• Insertion/withdrawal cycles
  ≥ 100
• Contact carrier material
  PP
• UNSPSC 7.0901
  31251501
• Ambient temperature (operation)
  -40 °C ... 85 °C (Plug / socket)
• Overvoltage category
  II
• Wrench size, union nut
  13 mm
• UNSPSC 13.2
  39121413
• UNSPSC 18.0
  39121413
• Rated current at 40°C
  0.5 A (30 W)
• Coding
  X - data
• Degree of pollution
  3
• Conductor cross section AWG
  26 (flexible)
• Stripping length of the sheath
  ≥ 70 mm
UNSPSC 20.0
39121413
Insulation resistance
≥ 100 MΩ
Number of positions
8
Connection method
Piercecon®
Conductor cross section
0.14 mm² ... 0.14 mm² (flexible)
UNSPSC 19.0
39121413
Assembly instructions
The connector pin assignment can be rotated 90° to the cable outlet
Material of grip body
Zinc die-cast, nickel-plated
ETIM 3.0
EC002062
Sealing material
NBR
UNSPSC 11
31251501
Connection in acc. with standard
UL
Contact surface material
Ni/Au
ECLASS 10.0.1
27440102
ETIM 6.0
EC002062
Contact material
CuSn
REACh SVHC
Lead 7439-92-1
Diameter housing
15 mm
Signal type/category
Ethernet CAT6A (IEC 11801), 10 Gbps
Transmission characteristics (category)
CAT6A
ECLASS 4.1
27260700
ECLASS 5.0
27260700
UNSPSC 6.01
31251501
Length
42 mm
Wire diameter including insulation
0.95 mm ... 1.15 mm
Standards/specifications
M12 connector IEC 61076-2-109
ECLASS 5.1
27260700
ECLASS 7.0
27440104
Rated voltage
48 V AC
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 4.0
EC002062
ECLASS 6.0
27279200
Flammability rating according to UL 94
V0
ETIM 2.0
EC001121
ECLASS 9.0
27440102
ECLASS 4.0
27260700
Material, knurls
Zinc die-cast, nickel-plated
Note
NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
ECLASS 11.0
27440102