1407505 Phoenix Contact Electrical Connectors

Product Details

• Rated surge voltage
  0.8 kV
• Insulation resistance
  ≥ 5 GΩ*km
• Coding
  Y - hybrid
• Thread type
  M16 x 1.5
• Contact carrier material
  PPA
• UL AWM style
  20963 (80°C/30 V)
• Ambient temperature (operation)
  -40 °C ... 90 °C (cable, fixed installation)
• Rated voltage
  48 V AC (Power and data)
• Standards/regulations
  M12 connector IEC 61076-2-113
• Torque
  2 Nm ... 3 Nm
• Degree of protection
  IP67
• Mounting type
  Rear mounting M16 x 1.5
• Contact surface material
  Au
• Cable type
  Ethernet hybrid
• AWG signal line
  26
• Core diameter including insulation
  1.05 mm (Data)
• Optical shield covering
  85 %
• Traversing path
  4.5 m
• Acceleration
  3 m/s²
• Loop resistance
  ≤ 280.00 Ω/km (Data)
Attenuation
6 dB (at 4 МHz)
Resistance to oil
according to IEC 60811-2-1
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27143400
UNSPSC 7.0901
31251501
UNSPSC 18.0
39121413
Overvoltage category
III
Flammability rating according to UL 94
V0
Cable structure
1x4xAWG26+1x4xAWG20
Conductor structure signal line
19x 0.10 mm
External cable diameter D
7.6 mm ±0.2 mm
Traversing rate
3 m/s
Conductor material
Bare Cu litz wires
Near end crosstalk attenuation (NEXT)
56.3 dB (at 4 МHz)
Differential impedance
100 Ω ±5 % (at 100 MHz)
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27440102
ECLASS 7.0
27440103
UNSPSC 11
31251501
UNSPSC 19.0
39121413
Degree of pollution
3
Insertion/withdrawal cycles
≥ 100
Material
Zinc die-cast (nickel-plated)
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Conductor cross section
4x 0.15 mm² (Data)
Wire colors
White/orange, orange, white/green, green, white, blue, brown, black
Shielding
Tinned copper braided shield
Minimum bending radius, fixed installation
5 x D
Tensile strength GRP
70 N (in accordance with DIN EN 50565-1 for flexible installation)
Working capacitance
nom. 50 nF (per kilometer)
Wave impedance
100 Ω ±15 Ω (4 MHz ... 100 MHz)
Test voltage Core/Shield
1500 V (50 Hz, 1 min.)
Other resistance
Low adhesion
ECLASS 10.0.1
27440102
ECLASS 4.1
27140800
ETIM 3.0
EC001855
UNSPSC 6.01
31251501
UNSPSC 21.0
39121413
Cable type (abbreviation)
94H
Overall twist
1 star quad and 4 wires with 2 fillers
External sheath, color
black RAL 9005
Minimum bending radius, drag chain applications
10 x D
Outer sheath, material
PUR
Material conductor insulation
PP (Data)
Nominal voltage, cable
≤ 50 V (Peak value, not for high-power applications)
Flame resistance
in acc. with UL 1581, section 1061
Shielded
yes
ECLASS 6.0
27279200
ETIM 6.0
EC002061
UNSPSC 13.2
39121413
Conductor structure, voltage supply
19x 0.20 mm
Number of bending cycles
2000000
Cable weight
87 kg/km
Shield attenuation
≥ 80 dB (30 MHz ... 125 MHz)
Halogen-free
according to IEC 60754
ECLASS 4.0
27140800
ECLASS 5.1
27143400
ECLASS 9.0
27440102
ETIM 4.0
EC001855
UNSPSC 12.01
31251501
UNSPSC 20.0
39121413
Signal type/category
Ethernet hybrid CAT5 (IEC 11801), 100 Mbps
Length of cable
1 m
Standards/specifications
M12 connector IEC 61076-2-113
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Number of positions
8
Sealing material
FKM
Test voltage Core/Core
1500 V (50 Hz, 1 min.)
Contact material
CuZn
Minimum bending radius, flexible installation
10 x D
Rated current at 40°C
0.5 A (Data)
Special properties
Free of substances which would hinder coating with paint or varnish
Transmission characteristics (category)
CAT5 (IEC 11801:2002)
AWG power supply
20