1407504 Phoenix Contact Electrical Connectors

Product Details

• Note
  The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
• Signal type/category
  Ethernet hybrid CAT5 (IEC 11801), 100 Mbps
• Insertion/withdrawal cycles
  > 100
• Contact material
  CuZn
• Standards/specifications
  M12 connector IEC 61076-2-113
• Conductor cross section
  4x 0.15 mm² (Data)
• Overall twist
  1 star quad and 4 wires with 2 fillers
• Minimum bending radius, fixed installation
  5 x D
• Traversing rate
  3 m/s
• Working capacitance
  nom. 50 nF (per kilometer)
• Attenuation
  6 dB (at 4 МHz)
• Shield attenuation
  ≥ 80 dB (30 MHz ... 125 MHz)
• Test voltage Core/Shield
  1500 V (50 Hz, 1 min.)
• ECLASS 11.0
  27440102
• ECLASS 4.0
  27140800
• ETIM 3.0
  EC001855
• UNSPSC 7.0901
  31251501
• UNSPSC 19.0
  39121413
• Rated current at 40°C
  0.5 A (Data)
• Standards/regulations
  M12 connector IEC 61076-2-113
Connection method
Cable connection
Mounting type
Rear mounting M16 x 1.5
Material, knurls
Zinc die-cast, nickel-plated
Cable type
Ethernet hybrid
AWG power supply
20
Conductor structure, voltage supply
19x 0.20 mm
Optical shield covering
85 %
Acceleration
3 m/s²
Material conductor insulation
PP (Data)
Near end crosstalk attenuation (NEXT)
56.3 dB (at 4 МHz)
Resistance to oil
according to IEC 60811-2-1
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27440103
UNSPSC 6.01
31251501
UNSPSC 18.0
39121413
Degree of protection
IP67
Rated surge voltage
0.8 kV
Coding
Y - hybrid
Transmission characteristics (category)
CAT5 (IEC 11801:2002)
Contact surface material
Ni/Au
UL AWM style
20963 (80°C/30 V)
Conductor structure signal line
19x 0.10 mm
External sheath, color
black RAL 9005
Minimum bending radius, flexible installation
10 x D
Number of bending cycles
2000000
Loop resistance
≤ 280.00 Ω/km (Data)
Conductor material
Bare Cu litz wires
Nominal voltage, cable
≤ 50 V (Peak value, not for high-power applications)
Halogen-free
according to IEC 60754
ECLASS 4.1
27140800
ECLASS 9.0
27440102
UNSPSC 11
31251501
UNSPSC 20.0
39121413
Ambient temperature (operation)
-40 °C ... 90 °C (cable, fixed installation)
Rated voltage
48 V AC (Power and data)
Degree of pollution
3
Thread type
M16 x 1.5
Sealing material
FKM
Cable type (abbreviation)
94H
Cable structure
1x4xAWG26+1x4xAWG20
Wire colors
White/orange, orange, white/green, green, white, blue, brown, black
External cable diameter D
7.6 mm ±0.2 mm
Minimum bending radius, drag chain applications
10 x D
Cable weight
87 kg/km
Differential impedance
100 Ω ±5 % (at 100 MHz)
Flame resistance
in acc. with UL 1581, section 1061
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27440102
ECLASS 5.1
27143400
ECLASS 6.0
27279200
ETIM 6.0
EC002061
UNSPSC 13.2
39121413
Length of cable
0.5 m
Number of positions
8
Overvoltage category
III
Torque
2 Nm ... 3 Nm (Installation-side)
Flammability rating according to UL 94
V0
Contact carrier material
PPA
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
AWG signal line
26
Core diameter including insulation
1.05 mm (Data)
Shielding
Tinned copper braided shield
Traversing path
4.5 m
Outer sheath, material
PUR
Tensile strength GRP
70 N (in accordance with DIN EN 50565-1 for flexible installation)
Wave impedance
100 Ω ±15 Ω (4 MHz ... 100 MHz)
Special properties
Free of substances which would hinder coating with paint or varnish
Other resistance
Low adhesion
Shielded
yes
ECLASS 5.0
27143400
ETIM 4.0
EC001855
UNSPSC 12.01
31251501
UNSPSC 21.0
39121413
Test voltage Core/Core
1500 V (50 Hz, 1 min.)
Insulation resistance
≥ 5 GΩ*km