1404245 Phoenix Contact Data & Networking Devices

1404245 on Power Resource International
Phoenix Contact

Part#:1404245

Manufacturer:Phoenix Contact

Category:Data & Networking Devices

Product Lifecycle:Active

Get a quick Quote!

Assembled Ethernet cable, CAT5e, shielded, 2-pair, AWG 26 stranded (7-wire), RAL 5021 (water blue), M12 flush-type socket, front/screw mounting with M16 thread on free conductor end, line, length 5 m

About the manufacturer: Phoenix Contact is one of the manufacturers that offers Data & Networking Devices that you can order at Power Resources International site. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.

Check out the 1404245 Phoenix Contact price in the box on the right side or send a quick quote.

Product Details

  • Note
    The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
  • Length of cable
    5 m
  • Rated voltage
    48 V AC
  • Degree of pollution
    3
  • Ambient temperature (operation)
    -40 °C ... 80 °C (cable, fixed installation)
  • Overvoltage category
    II
  • Contact material
    CuZn
  • Transmission characteristics (category)
    CAT5
  • External sheath, color
    water blue RAL 5021
  • Minimum bending radius, flexible installation
    8 x D
  • Cable capacity
    approx. 45 nF/km (at 1 kHz)
  • Cable type
    Ethernet flexible CAT5, 2-pair
  • Conductor structure signal line
    7x 0.16 mm
  • Optical shield covering
    70 %
  • Minimum bending radius, fixed installation
    4 x D
  • Outer sheath, material
    PUR
  • Signal runtime
    5.3 ns/m
  • Degree of protection
    IP67
  • Number of positions
    4
  • Contact surface material
    Ni/Au
  • AWG signal line
    26
  • Loop resistance
    ≤ 290.00 Ω/km
  • Current carrying capacity of cable
    2 A (according to DIN VDE 0891-1)
  • Rated current at 40°C
    4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
  • External cable diameter D
    6.4 mm ±0.2 mm
  • Insulation resistance
    ≥ 500 MΩ*km
  • Near end crosstalk attenuation (NEXT)
    65.3 dB (with 1 MHz)
  • Test voltage Core/Shield
    700 V (50 Hz, 1 min.)
  • Ambient temperature (storage/transport)
    -20 °C ... 80 °C
  • China RoHS
    For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
  • ECLASS 5.0
    19030300
  • UNSPSC 21.0
    26121604
  • Standards/regulations
    M12 connector IEC 61076-2-101
  • Alternative short product description
    Ethernet cable
  • Overall twist
    Two pairs with two fillers to the core
  • Tensile strength GRP
    ≤ 80 N
  • ECLASS 6.0
    27061800
  • Transmission speed
    100 Mbps
  • Cable type (abbreviation)
    93E
  • UL AWM style
    20963 (80°C/30 V)
  • Insertion/withdrawal cycles
    ≥ 100
  • Wire colors
    white/orange-orange, white/green-green
  • Cable weight
    42 kg/km
  • Attenuation
    3.2 dB (with 1 MHz)
  • Nominal voltage, cable
    ≤ 100 V (Peak value, not for high-power applications)
  • ECLASS 10.0.1
    27061801
  • ECLASS 4.0
    24010400
  • ETIM 3.0
    EC001262
  • ETIM 6.0
    EC000830
  • UNSPSC 12.01
    31261501
  • Signal type/category
    Ethernet CAT5 (IEC 11801), 100 Mbps
  • Flammability rating according to UL 94
    V0
  • Conductor material
    Bare Cu litz wires
  • Coupling resistance
    ≤ 100.00 mΩ/m (at 10 MHz)
  • Conductor cross section
    2x 2x 0.14 mm²
  • Core diameter including insulation
    0.98 mm
  • Shielded
    yes
  • Outer sheath thickness
    1.2 mm
  • Material conductor insulation
    Foamed PE
  • Power-summated near end crosstalk attenuation (PSNEXT)
    62.3 dB (with 1 MHz)
  • ECLASS 4.1
    24010400
  • ECLASS 9.0
    27061801
  • ETIM 7.0
    EC003249
  • UNSPSC 6.01
    26121616
  • UNSPSC 20.0
    26121604
  • Contact carrier material
    PA 6.6
  • Safety note
    WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
  • Test voltage Core/Core
    700 V (50 Hz, 1 min.)
  • Ambient temperature (installation)
    -20 °C ... 80 °C
  • REACh SVHC
    Lead 7439-92-1
  • UNSPSC 18.0
    26121604
  • Cable structure
    2x2xAWG26/7; SF/UTP
  • ECLASS 11.0
    27061801
  • Wave impedance
    100 Ω ±5 Ω (at 100 MHz)
  • Return loss (RL)
    23 dB (at 4 ĐśHz)
  • ECLASS 5.1
    19030300
  • ETIM 4.0
    EC000830
  • UNSPSC 19.0
    26121604
  • Flame resistance
    according to IEC 60332-1-2
  • Halogen-free
    according to IEC 60754-1
  • UNSPSC 7.0901
    26121616
  • UNSPSC 13.2
    26121604
  • Resistance to oil
    according to EN 60811-2-1
  • ECLASS 7.0
    27061801
  • Standards/specifications
    Electrical requirements EN 50288-2-2
  • UNSPSC 11
    26121604
  • Twisted pairs
    2 cores to the pair
  • Shielding
    Aluminum-coated foil, tinned copper braided shield

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.


Manufacturer warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Warranty


Responsive Customer Support


Need more details?

Feel free to chat with us

What can I help you find today?