1271835 Phoenix Contact Electrical Wires & Cables

Product Details

• Standards/regulations
  IEC 62196-2
• Depth
  111.4 mm
• Number of power contacts
  5 (L1, L2, L3, N, PE)
• Maximum charging power
  8 kW
• Rated voltage for power contacts
  250 V AC
• Insertion force
  < 100 N
• Screws included in the scope of delivery
  none
• Customer variations
  On request
• Locking type
  Locking in the inserted state with a locking mechanism
• Design
  Generation 4
• Height
  90 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Degree of protection
  IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
• Number of signal contacts
  2 (CP, PP)
• Resistor coding
  4.7 kΩ (between PE and PP)
• Withdrawal force
  < 100 N
• Material
  Plastic
• ECLASS 10.0.1
  27144706
• Application
  For charging electric vehicles (EV) with alternating current (AC)
• Charging standard
  Type 2
Note
A protective cap is supplied as standard for the AC contacts.
Max. altitude
4000 m (above sea level)
Rated current of power contacts
32 A AC
Type of signal transmission
Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121
Insulation resistance of neighboring contacts
> 200 MΩ
Mounting hole diameter
6.70 mm (ø)
Flammability rating
V0
Material surface of contacts
Ag
Charging mode
Mode 2, 3
Width
90 mm
Type
Locking actuator right
Note on the connection method
Crimp connection, cannot be disconnected
Ambient temperature (operation)
-40 °C ... 50 °C
Type of charging current
AC single-phase
Rated current for signal contacts
2 A
Temperature monitoring
AC contacts: PTC system (DIN EN 60738-1)
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Design line
Generation 4
ECLASS 11.0
27144706
Conductor length
2 m (AC cables)
Rated voltage for signal contacts
30 V AC
Insertion/withdrawal cycles
> 10000
Mounting position of the locking actuator
Right-side
Required mounting screws
M6
Housing color
black