1217839 Phoenix Contact Electrical Safety Devices

Product Details

• Height
  99 mm
• Input voltage range in reference to UN
  0.85 ... 1.1
• Typical release time
  20 ms (Undelayed contacts)
• Max. permissible overall conductor resistance
  500 Ω (Input and reset circuit at UN)
• Limiting continuous current
  6 A (N/O contact)
• Interrupting rating (ohmic load) max.
  144 W (24 V DC, τ = 0 ms)
• Mechanical service life
  approx. 107 cycles
• Mounting type
  DIN rail mounting
• Min. degree of protection of inst. location
  IP54
• Conductor cross section AWG min.
  24
• Designation
  Air clearances and creepage distances between the power circuits
• Standards/regulations
  DIN EN 60947-1
• REACh SVHC
  Lead 7439-92-1
• ECLASS 11.0
  27371819
• Width
  22.5 mm
• Ambient temperature (storage/transport)
  -40 °C ... 70 °C
• Nominal input voltage UN
  24 V DC
• Voltage at input/start and feedback circuit
  approx. 24 V DC
• Protective circuit
  Suppressor diode, 33 V DC
• Inrush current, minimum
  25 mA
Switching capacity min.
0.4 W
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Conductor cross section solid min.
0.2 mm²
Stop category
0
Category
4
Safety Integrity Level Claim Limit (SIL CL)
3
Rated surge voltage/insulation
4 kV / basic insulation
ECLASS 9.0
27371819
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Recovery time
330 ms (Restart)
Status display
LED K1/K2 and K3(t)/K4(t), green
Maximum switching voltage
250 V AC/DC
Maximum interrupting rating (inductive load)
42 W (24 V DC, τ = 40 ms)
Nominal operating mode
100% operating factor
Net weight
6500 g
Housing material
PBT
Conductor cross section flexible max.
2.5 mm²
Stripping length
7 mm
Performance level (PL)
e
Overvoltage category
II
ECLASS 10.0.1
27371819
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Depth
114.5 mm
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Typical input current at UN
75 mA DC
Typical release time range
0.1 s ... 30 s
Contact type
4 enabling current paths
Maximum inrush current
6 A
Switching capacity (360/h cycles)
on request
Degree of protection
IP20
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
12
Safety Integrity Level (SIL)
3
Degree of pollution
2
Vibration (operation)
10 Hz ... 150 Hz, 2g
Ambient temperature (operation)
-20 °C ... 45 °C
Maximum altitude
≤ 2000 m (Above sea level)
Typical response time
150 ms (Monitored/manual and auto-start)
Operating voltage display
Green LED
Contact material
AgSnO2
Minimum switching voltage
15 V AC/DC
Sq. Total current
120 A2 (see to derating)
Output fuse
10 A gL/gG NEOZED (N/O contact)
Mounting position
any
Connection method
Screw connection
pluggable
Yes
Screw thread
M3
Rated insulation voltage
250 V
Shock
15g