1211206 Phoenix Contact Electrical Wires & Cables

Product Details

• Design
  Generation 4
• Charging mode
  Mode 2, 3, 4
• Width
  108 mm
• Max. altitude
  4000 m (above sea level)
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Number of phases
  1
• Number of power contacts
  5 (L1, N, PE, DC+, DC-)
• Insulation resistance of neighboring contacts
  > 200 MΩ
• Withdrawal force
  < 100 N
• Screws included in the scope of delivery
  none
• Customer variations
  On request
• Flammability rating
  V0
• Outer sheath, material
  PVC
• Number of positions of theconnectors
  4
• Operating voltage
  24 V (Typical power supply at the motor)
• Recommended adaptation time
  600 ms
• Lock recognition
  available
• Resistance range
  650 Ω ... 1450 Ω
• Application
  For charging with alternating current (AC) and with direct current (DC)
• Note on the connection method
  Crimp connection, cannot be disconnected
Conductor length
2 m (AC cables)
Ambient temperature (operation)
-30 °C ... 50 °C
Type of charging current
DC, AC 1-phase
Rated voltage for signal contacts
30 V AC
Resistor coding
4.7 kΩ (between PE and PP)
Insertion force
< 100 N
Required mounting screws
M6
Material
Plastic
Locking type
Locking in the inserted state with a locking mechanism
Cable resistance
≤ 37.1 Ω/km
External sheath, color
Green-yellow
Maximum voltage for locking detection
30 V
Typical motor current for locking
0.05 A
Reverse current of the motor
max. 0.5 A
Tolerance at the sensor with the recommended measured current
±5K
ECLASS 9.0
27144706
Type
Locking actuator right
Note
A protective cap is supplied as standard for the DC and AC contacts.
Depth
128.4 mm
Maximum charging power
250 kW
Number of signal contacts
2 (CP, PP)
Rated voltage for power contacts
250 V AC
Temperature monitoring
AC contacts: PTC chain (DIN˽EN˽60738-1)
Insertion/withdrawal cycles
> 10000
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Design line
Generation 4
Housing color
black
Cable structure
4 x 0.5 mm²
Cable weight
7 kg/km
Possible power supply range at the motor
22 V ... 26 V
Pause time after entry or exit path
3 s
Recommended measured current
≤ 1 mA (Umax= 16 V DC)
ECLASS 10.0.1
27144706
Charging standard
CCS type 2
Height
140.25 mm
Bore dimensions
117.65 mm x 90 mm, 117.65 mm x 83 mm
Degree of protection
IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
Rated current of power contacts
32 A AC
Rated current for signal contacts
2 A
Type of signal transmission
Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121
Temperature measurement
DC contacts: 2x PT1000 (DIN EN 60751)
Mounting position of the locking actuator
Right-side
Mounting hole diameter
6.80 mm (ø)
Material surface of contacts
Ag
External cable diameter
1.6 mm -0.2 mm
Minimum bending radius
15 mm
Single wire, color
black PP/CS
Max. dwell time with reverse current
1 s
Mechanical emergency release
available
Cable length
0.5 m
Temperature range
-40 °C ... 130 °C
Standards/regulations
DIN EN 60751
Service life insertion cycles
> 10000 load cycles
Type of sensor
Pt 1000
ECLASS 11.0
27144706