1151587 Phoenix Contact Electrical Safety Devices

Product Details

• Width
  22.5 mm
• Ambient temperature (storage/transport)
  -40 °C ... 80 °C
• Rated control supply current IS
  60 mA
• Input name
  Enable input
• Switching threshold
  9.6 V (“0” signal)
• Triggering voltage range
  19.2 V DC ... 30 V DC
• Mains frequency
  50/60 Hz
• Load current range
  1.5 A ... 9 A (see to derating)
• Switching frequency
  ≤ 2 Hz (Load-dependent)
• Status display
  Yellow LED
• Connection name
  Load circuit
• Conductor cross section solid
  0.2 mm² ... 2.5 mm²
• Degree of pollution
  2
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 11.0
  27370905
• Maximum altitude
  ≤ 2000 m
• Rated control circuit supply voltage US
  24 V DC
• Rated actuating voltage UC
  24 V DC
• Output name
  AC output
• Rated operating current Ie
  9 A (AC-51)
Leakage current
0 mA
Mounting position
vertical (horizontal DIN rail, motor output below)
Minimum power dissipation
0.88 W
Connection method
Screw connection
Rated surge voltage
6 kV
Designation
Standards/regulations
Height
160 mm
Degree of protection
IP20
Note
The enable input is compatible with signals with blanking (semiconductor output signals with test pulse with max. 3 ms duration),unblanking pulses of max. 4 ms are tolerated without adversely affecting the safety function.
Typical turn-off time
< 30 ms
Rated operating voltage Ue
500 V AC
Response time
< 0.5 s
Assembly instructions
alignable, for spacing see derating
Indication
Red LED
Control supply voltage range
19.2 V DC ... 30 V DC
Rated actuating current IC
7 mA
Operating voltage range
42 V AC ... 550 V AC
Cooling time
20 min. (for auto reset)
Operate threshold
> 60 A
Operating mode
100% operating factor
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Conductor cross section AWG
24 ... 14
Overvoltage category
III
REACh SVHC
Lead 7439-92-1
Depth
114.5 mm
Ambient temperature (operation)
-5 °C ... 60 °C (observe derating)
Type of protection
Surge protection
Switching level
< 5 V DC (For EMERGENCY STOP)
Trigger characteristic in acc. with IEC 60947-4-2
Class 10A
Motor starter type
Reversing starter
Maximum power dissipation
7 W
Stripping length
8 mm
Torque
0.5 Nm ... 0.6 Nm
Rated insulation voltage
550 V
Insulation
Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC
Operating voltage display
Green LED
Screw thread
M3
Standards/regulations
IEC 60947-1
ECLASS 9.0
27370905
ECLASS 10.0.1
27370905