1139805 Phoenix Contact Electrical Wires & Cables

Product Details

• Length
  19.2 mm
• Note
  NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
• Coding
  A - standard
• Degree of pollution
  3
• Mounting type
  Front mounting M20 x 1,5
• Contact material
  CuSn
• ECLASS 9.0
  27440103
• Diameter housing
  29 mm
• Rated current at 40°C
  4 A (2 A when using 0.14 mm² conductors)
• Standards/regulations
  M12 connector IEC 61076-2-101
• Conductor cross section
  0.14 mm² ... 0.75 mm² (without ferrule)
• Assembly instructions
  The wires can be connected both with ferrules and without ferrules
• Contact surface material
  Ni/Au
• Standards/specifications
  M12 connector IEC 61076-2-101
• Stripping length of the individual wire
  7 mm
• Rated voltage
  48 V AC
• Signal type/category
  Universal
• Connection method
  Push-lock connection
• Torque
  0.4 Nm (M12 plug)
• Contact carrier material
  PA 6.6
Additional material specifications
PA 6 (Actuation lever)
Ambient temperature (operation)
-40 °C ... 85 °C (Plug / socket)
Number of positions
5
Status display
No
Conductor cross section AWG
26 ... 18 (without ferrule)
Thread type
M20 x 1,5
Material, knurls
Nickel-plated brass
ECLASS 10.0.1
27440109
Degree of protection
IP67
Insulation resistance
≥ 100 MΩ
Overvoltage category
II
Insertion/withdrawal cycles
≥ 100
Flammability rating according to UL 94
V0
Sealing material
NBR (M12 socket)
ECLASS 11.0
27440109