1139804 Phoenix Contact Electrical Wires & Cables

Product Details

• Length
  21 mm
• Stripping length of the individual wire
  7 mm
• Coding
  A - standard
• Signal type/category
  Universal
• Conductor cross section
  0.14 mm² ... 0.75 mm² (without ferrule)
• Mounting type
  Front mounting M20 x 1,5
• Contact surface material
  Ni/Au
• Standards/specifications
  M12 connector IEC 61076-2-101
• ECLASS 11.0
  27440109
• Diameter housing
  29 mm
• Number of positions
  5
• Insulation resistance
  ≥ 100 MΩ
• Degree of pollution
  3
• Connection method
  Push-lock connection
• Thread type
  M20 x 1,5
• Contact material
  CuSn
• Material, knurls
  Nickel-plated brass
• Ambient temperature (operation)
  -40 °C ... 85 °C (Plug / socket)
• Note
  NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
• Rated current at 40°C
  4 A (2 A when using 0.14 mm² conductors)
Overvoltage category
II
Conductor cross section AWG
26 ... 18 (without ferrule)
Assembly instructions
The wires can be connected both with ferrules and without ferrules
Contact carrier material
PA 6.6
Additional material specifications
PA 6 (Actuation lever)
ECLASS 9.0
27440103
Degree of protection
IP67
Rated voltage
48 V AC
Standards/regulations
M12 connector IEC 61076-2-101
Status display
No
Torque
2 Nm (Installation-side)
Insertion/withdrawal cycles
≥ 100
Flammability rating according to UL 94
V0
ECLASS 10.0.1
27440109