1139802 Phoenix Contact Electrical Wires & Cables

Product Details

• Insulation resistance
  ≥ 100 MΩ
• Degree of pollution
  3
• Insertion/withdrawal cycles
  ≥ 100
• Assembly instructions
  The wires can be connected both with ferrules and without ferrules
• Contact carrier material
  PA 6.6
• ECLASS 9.0
  27440103
• Rated voltage
  48 V AC
• Connection method
  Push-lock connection
• Torque
  2 Nm (Installation-side)
• Flammability rating according to UL 94
  V0
• Thread type
  M20 x 1,5
• ECLASS 10.0.1
  27440109
• Degree of protection
  IP67
• Coding
  A - standard
• Conductor cross section
  0.14 mm² ... 0.75 mm² (without ferrule)
• Contact material
  CuSn
• Standards/specifications
  M12 connector IEC 61076-2-101
• Stripping length of the individual wire
  7 mm
• Rated current at 40°C
  4 A (2 A when using 0.14 mm² conductors)
• Signal type/category
  Universal
Overvoltage category
II
Conductor cross section AWG
26 ... 18 (without ferrule)
Material, knurls
Nickel-plated brass
Additional material specifications
PA 6 (Actuation lever)
Length
21 mm
Number of positions
4
Status display
No
Mounting type
Front mounting M20 x 1,5
Contact surface material
Ni/Au
ECLASS 11.0
27440109
Standards/regulations
M12 connector IEC 61076-2-101
Diameter housing
29 mm
Ambient temperature (operation)
-40 °C ... 85 °C (Plug / socket)
Note
NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.